Panasonic ET-PKD120S Installation Instructions Manual page 10

Installation (continued)
"FRONT" inscription
Hook
Secure with the supplied captive washer
hex head bolts
Wire rope
10 - ENGLISH
2) Insert the temporarily fastened captive washer hex
head bolts on either side into the hook section of
the angle adjusting bracket.
Attention
z Hold the projector firmly until the captive washer
hex head bolts are securely placed in the hook part
of the angle adjusting bracket.
WARNING:
Mounting and installation must be carried out
by two or more persons.
3) Secure the angle adjusting bracket to the
attachment plate using the supplied two captive
washer hex head bolts (M6 × 16), as illustrated on
the left.
Attention
z After adjusting the installation angle on pages 12 to 13,
securely tighten the captive washer hex head bolt
of the attachment plate in four places on right and
left.
4) Pass the wire rope between the angle adjusting
bracket and the attachment plate as illustrated on
the left.