Table of Contents
Advertisement
MENU
Digital NR
Black Level
Color Pattern
Overscan
1080/24 fps Mode
Film Mode
3-5
When a dotted line is displayed or the screen shakes, you can view the picture with better visual qual-
ity by enabling Noise Reduction.
•
<Off >-<On>
You can not set in <PC> mode.
If the picture seems too dark, you can set a brighter black level.
•
You can not set in <PC> mode.
•
The Black Level can only be selected in <Component>, <Video>, <S-Video>, <HDMI 1>
and <HDMI 2> modes.
For <Video>, <Component> and <S-Video> Modes
•
<0 IRE> : Default black level.
•
<7.5 IRE> : Set the black level so it is darker.
For <HDMI 1>, <HDMI 2> Modes
•
<Low > : Set the brightness standard for dark signals to a low setting.
If the input signal is an [HDMI-Video] type, unclear screens are displayed normally.
•
<Normal > : Set the brightness standard for dark signals to a high setting.
If the input signal is an [HDMI-PC] type, dark screens are displayed bright.
You can filter the color of the entire screen according to your taste. Make optimal display settings for
movies.
You can not set in <PC> mode.
•
<Off >: Shows the picture in the original color.
•
<Monochrome >: Shows the picture in black and white by filtering out all color signals.
•
<Red >: Shows the picture in red by filtering out the green and blue color signals.
•
<Green >: Shows the picture in green by filtering out the red and blue color signals.
•
<Blue >: Shows the picture in blue by filtering out the red and green color signals.
Using this function, you can cut the edge of the picture when unnecessary information or images
appear on the edge of the picture.
You can not set in <PC> mode.
•
<Off >-<On>
This function displays the full 1080P@24Hz native HD signals which have 24 frames per second with
minimal scene distortion, as in a movie. Though the difference is small, this function implements the
highest screen quality.
You can adjust <1080p/24 fps Mode> mode in <HDMI 1>, <HDMI 2> and <Component>
modes only.
•
<Off >: Displays scenes where 24 frames are lengthened to 60 frames. Because of this process,
screen judder may be generated.
•
<On >: Displays scenes where 24 frames are lengthened to 48 frames. All scenes are displayed
regularly without any screen judder.
Using this function, you can set the display mode optimized
vides optimal display settings for movies.
Film Mode is only supported for <Video>, <S-Video> and <Component>(480i,576i).
•
<Off >-<On>
DESCRIPTION
for playing
movies.
<Film Mode> pro-
Using
Hide quick links:
Advertisement
Table of Contents
