Download
Share
Print this page
Samsung SP-A900B Owner's Instructions Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Projector
  5. SP-A900B
  6. Owner's instructions manual

Samsung SP-A900B Owner's Instructions Manual

Hide thumbs Also See for SP-A900B:

Advertisement

Quick Links

Download this manual See also: Owner's Instruction Manual
The product color and shape may vary depending
on the model.

Advertisement

loading

Related Manuals for Samsung SP-A900B

Summary of Contents for Samsung SP-A900B

  • Page 1 The product color and shape may vary depending on the model.
  • Page 2 To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. Failure to follow the instructions marked with this symbol may cause personal injury or even fatality. Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property.
  • Page 3 To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. There is a danger of electric shock or fire. Always unplug the unit by holding the power plug. Pulling the power cable may damage the inside of it.
  • Page 4 Do not install on an unstable location, or on a stand smaller than the product. If the product falls it may harm children. Install on a flat and stable location as the front part is heavy. In case of thunder/lightning, disconnect the power cord from the wall outlet. There is a danger of electric shock or fire.
  • Page 5 This may cause electric shock or fire. If water or an alien substance enters the product, turn the product off, disconnect the power cord from a wall outlet and contact a Do not disassemble, or attempt to fix or modify the product. When the product requires repairs, contact a Do not use or keep the product near flammable sprays or other such substances.

  • Page 6: Correct Disposal Of This Product (Waste Electrical & Electronic Equipment) - Europe Only

    When cleaning the product, disconnect the power cord and wipe the product using a soft dry cloth. When not using the product for an extended period of time, disconnect the power plug. Do not install the product in places with heavy dust, chemical substances, high or low temperatures, high humidity, or where it will be operated for a long period continuously etc.
  • Page 7 (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household waste at the end of its working life. To prevent possible harm to the environment or damage to health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
  • Page 8 Optical engine with advanced DLP technology - Full 1920x1080 HD panel. - 6 segment color wheel to implement optimal colors. - 300W Lamp designed to improve luminance Vivid colors - Quality picture tuning focused on improving color - this unit aims at realizing color coordinates that meet broadcasting standards on video production.

  • Page 9: Source Button

    1. Indicators - TEMP (Red LED) - LAMP (Blue LED) - STAND BY (Blue LED) ※ Refer to the Indications. 2. Focus Ring Used for Focus Adjustment. 3. Lens 4. Lens Position Moving Dial You can adjust screen images up and down within the lens range.
  • Page 10 Power Cable LED Indications :Light is On :Light is Blinking :Light is Off STAND BY LAMP TEMP If you press the POWER button on the remote control or projector, the screen appears within 30 seconds. The projector is in normal operating condition. This state appears when the projector is preparing an operation after the POWER button on the projector or the remote control has been pressed.
  • Page 11 When temperature inside Action 3 of the projector becomes too high. When the DDP IC or color wheel Action 4 fails to operate. The lamp malfunctions after power turns off Action 5 abnormally or after powering on right after turning off the projector. When the screen becomes Action 6 darker...
  • Page 12 Product Features ON ( Used to turn on the projector. COMP1 Used to switch to COMPONENT 1 Mode. 3. VIDEO Used to switch to Video Mode. S-VIDEO Used to switch to S-VIDEO Mode. Used to switch to PC Mode. MENU Used to display Menu Screen.
  • Page 13 Used to adjust the size of picture screen. STILL Used to see still images. P.MODE Used to select Picture Mode. OFF ( Used to turn off the projector. LIGHT ( Used to operate remote control in dark room. HDMI1 Used to switch to HDMI 1 Mode. HDMI2 Used to switch to HDMI 2 Mode.
  • Page 14 The DMD Panel used in DLP Projectors consists of several hundred thousand micro mirrors. As with other visual display elements, the DMD Panel may include a few bad pixels. Samsung and the DMD Panel manufacturer have a rigid, bad pixel identification and limitation procedure in place and products will not exceed the maximum number of bad pixels set by our standards.
  • Page 15 1664x748 1696x750 1280x720 1696x751 1696x755 1664x798 1280x768 1696x805 1712x809 1800x1000 1728x999 1280x960 1728x1001 1728x1005 1728x1011 PC, DVI 1688x1066 1728x1066 1280x1024 1728x1067 1688x1066 1728x1072 1360x768 1792x795 1864x1089 1400x1050 1896x1099 1904x934 1440x900 1936x942 1952x948 1600x1200 2160x1250 PC, DVI 1920x1080 2080x1111 1920x1200 2080x1235 858x525 720x480 858x525...
  • Page 16 O : Size & Overscan can be configured, x : Size & Overscan cannot be configured, △: Size can be configured Source Input Type Mode 1080p 1080i 720p HDMI 576p 480p 576i 480i 1080p 1080i 720p Component 576p 480p 576i 480i 576i Video &...
  • Page 17 1080p 1080i 720p 576p 640 x 480p 720 x 480p HDMI 576i 480i 1280 x 1024/60 1024 x 768/60 800 x 600/60 720 x 400/70 640 x 350/70 1080p 1080i 720p Component 576p 480p 576i 480i 576i Video & S- Video 480i 1080p 1080i...
  • Page 18 Installing the Projector Install the projector so that the beam from the projector is perpendicular to the screen. Place the projector so that the lens is at the center of the screen. If the screen is not vertically installed, the picture on the screen may not be a rectangle. Do not install the screen in bright surroundings.
  • Page 19 Zoom Knob Focus Ring You can adjust the size of image within zoom range by manipulating the Zoom Knob. Focus the picture on the screen using the Focus Ring. If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection be adjusted correctly.
  • Page 20 Screen size Horizental Vertical(Y:mm) (M:inch) (X:mm) 1107 1328 1550 1771 1992 2214 2435 2657 2878 3099 3321 3542 3763 3985 4206 4428 4649 4870 5092 5313 5535 6641 This projector is designed to show images optimally on a 100 ~ 120 inch sized screen. A.
  • Page 21 2. Click on [Settings] tab and set the <Screen resolution> by referring to <Resolution> described in table supported by this projector. You do not have to change <Color quality> setup. 3. Press the [Advanced] button. Another property window will appear. 4.
  • Page 22 projector. If not, there may be signal problems. 1. Rear of Projector Plug the power cord into the power terminal on the rear side of the projector. When used outside of the U.S., HAR cord with fittings of an approved agency may be used. Connecting a DVD player/Cable/Satellite Box to HDMI/DVI Basic Settings Connecting the Power...
  • Page 23 - Connecting using a HDMI/DVI cable Connect the [HDMI 1/DVI IN] terminal on the back of the projector and the DVI output terminal of the DVD player/Cable/Satellite box using a HDMI/DVI cable. - Connecting using a HDMI cable Connect the [HDMI 1/DVI IN] or [HDMI IN 2] terminal on the back of the projector and the HDMI output terminal of the DVD player/Cable/Satellite box using a HDMI cable.
  • Page 24 Connect the [COMPONENT IN 1 (Y/P to the Component port at the back of the DVD player/Cable/Satellite box with the Component cable. When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box. Using the Projector Turn on the projector and press the [COMP1] button to select <Component 1>.
  • Page 25 Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable. - If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector. Using the S-VIDEO connection, provides a higher visual quality.
  • Page 26 Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. When connections are all completed, connect both power codes of the projector and the PC. This product supports plug and play and therefore, if you use Window XP you do not need to setup the driver on your PC.
  • Page 27 Screen Adjustment Source List You can select a device connected to the projector to display. 1) Component 1 2) Component 2 3) S-Video 4) Video Edit Name You can edit the names of devices connected to the projector. 1) Component 1 2) Component 2 3) S-Video 4) Video...
  • Page 28 Screen Adjustment Mode Select a screen state which is customized to your projector or change the screen mode as required. 1) Mode - Dynamic Select this if you want the screen quality to be clearer than standard screen quality. - Standard You can comfortably view the projection screen if the surrounding is somewhat bright.
  • Page 29 1) Color Temperature 2) R-Gain 3) G-Gain 4) B-Gain 8) Gamma : An image compensation function that controls the settings according to the video properties. - Film : The best setting for watching a film. - Video : The best setting for watching a TV program. - Graphic : The best setting when you have a PC connected.
  • Page 30 1) Off : Shows the picture in the original color. 2) Monochrome : Shows the picture in black and white by filtering out all color signals. 3) Red : Shows the picture in red by filtering out the green and blue color signals. 4) Green : Shows the picture in green by filtering out the red and blue color signals.
  • Page 31 Adjustment Install To tailor the picture to the installation location, you can invert the projected images vertically/horizontally. 1) Front-Floor : Normal Image 2) Front-Ceiling : Horizontal/Vertical Reversed Image 3) Rear-Floor : Horizontally Reversed Image 4) Rear-Ceiling : Vertically Reversed Image Light Setting Used to set the image brightness by adjusting the amount of light generated by the lamp.
  • Page 32 Factory Default Using this function, you can reset various settings to the factory default settings. Screen Adjustment Language You can select the language used for the menu screen. Menu Position You can move Menu Position up/down/left/right. Menu You can set the translucency of menu. Translucency 1) Opaque 2) Low...
  • Page 33 LED Indicator You can enable or disable the operating LED's on the product. 1) Off : This mode disables the operating LED. However, the LED will come on regardless of the LED setting when the power is turned on or off or when the projector is in an abnormal state.
  • Page 34 Installation and Connection Symptoms No Power. I want to install my projector on the ceiling. External Source can not be selected. Menu and Remote Control Symptoms Remote control does not work. I cannot select a menu. Screen and External Source Symptoms Cannot see picture images.
  • Page 35 Only blue screen appears. Screen appears in black and white or odd color./ screen is too dark or bright. adjustment items, such as the Brightness and the Contrast have been changed correctly in the <Mode> command screen of the Projector menu. Be sure to properly connect the external devices.
  • Page 36 Do not leave the old lamp near inflammables or in reach of children. There is a danger of burn or injury. Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device. Care and Maintenance Contact SAMSUNG WORLDWIDE Other Authority...
  • Page 37 Remove the screws (A) in the figure and then hold and open (B). Assembling a new lamp is in the reverse order of the disassembly. If you have any questions or comments relating to Samsung products, please contact a SAMSUNG customer care center. U.S.A 1-800-SAMSUNG(726-7864)
  • Page 38 EIRE 0818 717 100 FINLAND 30 - 6227 515 3260 dites 'SAMSUNG' (€ 0,15/Min) FRANCE 0825 08 65 65 (€ 0.15/Min) GERMANY 01805 - SAMSUNG (7267864, € 0.14/Min) HUNGARY 06-80-SAMSUNG (726-7864) ITALIA 800-SAMSUNG (726-7864) LUXEMBURG 02 261 03 710 NETHERLANDS 0900-SAMSUNG (0900-7267864) (€...
  • Page 39 SLOVAKIA 0800-SAMSUNG (726-7864) SPAIN 902 - 1 - SAMSUNG (902 172 678) SWEDEN 075 - SAMSUNG(726 78 64) SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) 0845 SAMSUNG (7267864) ESTONIA 800-7267 LATVIA 8000-7267 LITHUANIA 8-800-77777 KAZAKHSTAN 8-10-800-500-55-500 KYRGYZSTAN 00-800-500-55-500 RUSSIA 8-800-555-55-55 TADJIKISTAN...
  • Page 40 DLP is a digital display technology using a DMD panel developed by TI (Texas Instruments) of the United States. DLP HD2, DC2, DC3 This is a grade of DMD panel. DMD (Digital Micromirror Device) http://www.samsung.com/tr http://www.samsung.com/ae Care and Maintenance Contact SAMSUNG WORLDWIDE Other Authority...
  • Page 41 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.