Your Vokèra Compact
3. The temperature of the domestic hot water can easily be adjusted using the hot
water temperature selector.
Rotate the temperature selector clockwise to increase the temperature and counter-
clockwise to decrease the temperature - until you reach your desired setting. The
temperature can be set from a minimum of 37°C to a maximum of 60°C.
4. Boiler pressure.
When the needle is between 1 and 2 on the pressure gauge the
boiler pressure is adequate, if the needle falls below 1 the boiler will need to be
topped up using the filling loop.
The central heating (radiator) temperature can easily be adjusted using the heating
temperature selector.
Rotate the temperature selector clockwise to increase the temperature and counter
clockwise to decrease the temperature - until you reach your desired setting. The
temperature can be set from a minimum of 40°C to a maximum of 80°C.
VOKER
COMP CT
combi boiler
How to use your Vokèra Compact
Your boiler is a combi boiler, it therefore provides hot water whenever a
hot tap is opened, and central heating when required.
Setting the heating and hot water
1. Check
that the boiler is turned on at the electricity supply. If it is not,
turn the boiler ON. It will go through a self-test cycle that will last about
2 ½ minutes. Wait for this to end before adjusting the boiler.
2. Choose
with the selector knob:
Standby
- no heating or hot water but boiler will protect itself
against frost if cold
Summer position
Winter position
- no heating, just hot water
- heating and hot water
Need help?
Do you have a question about the COMPACT A and is the answer not in the manual?
Questions and answers