Saving Pm Profile; Displaying Pm Profile Information - Dasan V5808 User Manual

User Manual
V5808
12.10.3
i i
12.10.4
To enable/disable the performance monitoring (PM) function to collect the traffic statistics
of the configured GEM NCTP ports, use the following command.
Command
pm gem-nctp
no pm gem-nctp

Saving PM Profile

After configuring a PM profile, you need to save the profile with the following command.
Command
apply
Even if you modify a running profile, you also need to use the apply command to apply
the changes to ONUs (ONTs).

Displaying PM Profile Information

To display the information of PM profiles, use the following command.
Command
show pm-profile [NAME]
To display the information of current profile, use the following command.
Command
show current-profile
Mode
Enables the PM function to collect the counters of the
configured GEM port network CTP for a specified traffic
profile.
PM-Profile
Disables the PM function to collect the counters of the
configured GEM port network CTP.
Mode
PM-Profile Saves a PM profile configuration.
Mode
GPON
Shows the information of PM profiles.
GPON-OLT
NAME: PM profile name
PM-Profile
Mode
Current- Shows the information currently configured for the
Profile profile.
UMN:CLI
Description
Description
Description
Description
781