User Manual
V5808
12.1.18
olt ber ds-interval <1000-10000>
[olt ber sd-threshold <4-9>] [olt
ber sf-threshold <3-8>] [olt ber
us-interval <1000-10000>]
olt ber us-interval <1000-10000>
[olt
ber
ds-interval
10000>] [olt ber sd-threshold <4-
9>] [olt ber sf-threshold <3-8>]
olt ber sd-threshold <4-9> [olt
ber
ds-interval
<1000-10000>]
[olt
ber
us-interval
10000>] [olt ber sf-threshold <3-
8>]
olt ber sf-threshold <3-8> [olt
ber
ds-interval
<1000-10000>]
[olt
ber
us-interval
10000>] [olt ber sd-threshold <4-
9>]
To display the information of OLT Bit Error Ratio (BER), use the following command.
Command
show olt ber [OLT-ID]
show olt ber
OMCC Monitoring
If an error occurs on the ONT Management and Control Channel (OMCC), the OLT
attemps to recover from an error and the ONUs are deactivated by the OLT until the
OMCC is recovered.
To enable/disable the OMCC recovery monitoring function with ONU deactivation process,
use the following command.
Command
olt omcc-recovery enable
olt omcc-recovery threshold <5-
720>
olt
omcc-recovery
deactivation
Specifies the monitor direction and interval of the bit
error ratio.
ds-interval: Downstream BER interval from OLT to
ONU
us-interval: Upstream BER interval from ONU to OLT
1000-10000: downstream BER interval value (default:
<1000-
5000ms)
1000-10000: upstream BER interval value (default:
2000ms)
GPON-OLT
<1000-
Sets the threshold for reporting of signal degrade (SD)
BER or signal fail (SF) BER alarms.
4-9: SD threshold value (default: 8)
3-8: SF threshold value (default: 7)
<1000-
Mode
Enable
Shows OLT's Bit Error Ratio (BER) configuration
Global
(including upstream/downstream BER interval and
GPON
threshold).
GPON-OLT
Mode
Enables the OMCC recovery monitoring function with
ONU deactivation process.
Sets the threshold limit for OMCC recovery attempts.
GPON-OLT
5-720: the number of times OLT can atttemp to retry
OMCC recovery (default: 5)
mode
Sends the deactivation PLOAM when OLT detects the
OMCC problem.
UMN:CLI
Description
Description
641
Need help?
Do you have a question about the V5808 and is the answer not in the manual?
Questions and answers