Know Your Product; Setup & Preparation - Ozito ASG-GFK Instruction Manual

KNOW YOUR PRODUCT

GRAVITY FEED SPRAY GUN
1 Nozzle
2 Nozzle Collar
3 Variable Trigger
4 Fan Adjustment Dial
5 Paint Pot
1 2 3 4 5
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
6 Air Regulator Valve
7 Air Inlet
8 Fluid Adjustment Dial
9 Air Vent
6 7 8
SETUP & PREPARATION
1. ASSEMBLY
WARNING!
THE AIR SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
Inserting the Filter
1 Simply place the filter into
the top hole of the spray
gun with the knob facing
up.
Fitting the Paint Pot
1 Align the paint pot with the
hole on the top of the spray
gun.
Attaching to Compressor
1 Wrap the threaded male air
inlet of the spray gun with
teflon tape in a clockwise
direction.
9
3 Pull back the sleeve on
hose fitting, insert male
end & release sleeve
on hose fitting.
ENSURE THE TOOL IS DISCONNECTED FROM
2 Screw the paint pot in
tightly by hand.
2 Screw the female fitting
clockwise onto the male
end of the air inlet.