Anynet - Samsung 2.008030309222e16 Instruction Manual

Connecting external devices
(Cont'd)
Connecting audio/7.1 channel devices
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
CD Player
DVD/Blu-RAY or 7.1 channel player
14
TV
Connecting external devices via HDMI
By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio
without conversion to analog.
DVD or Blu-RAY Player SAT
(Cable/Satellite/Set-top box)
• Connect it if you
TV
want to use Anynet+.
High-bandwidth Digital Content Protection System (HDCP) support
To play digital contents through the HDMI connection, both of the connected external device and TV must support High-bandwidth Digital Content
Protection System (HDCP). This product supports HDCP.
COMPATIBILITY WITH A TV SUPPORTING HDMI
A TV with an HDMI jack.
A TV with a DVI-D jack (TV supporting HDCP)
A TV with a DVI-D jack (TV not supporting HDCP)
• If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the AV receiver using the TV's remote
control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC).
• Please check the logo. If your TV has an
• Audio from SACD discs will not be played. To play a
DVD disk whose copyright is protected by CPPM, use a
player supporting CPPM.
• The quality of the audio output through the HDMI jack
(sampling frequency and bit rate) may be limited by the
performance of the connected device.
• Since HDMI connection supports both video and audio,
you don't have to connect an additional audio cable.
Video/Audio
Video
-
logo, then it supports the Anynet+ function.
ENG
15