Copying Problems - Samsung SF-650 User Manual
Sf-650 fax machine
Hide thumbs
Also See for SF-650:
- Manual del usuario (88 pages) ,
- User manual (83 pages) ,
- Quick reference manual (4 pages)
Table of Contents
Advertisement
CONDITION
Loose toner
Character Voids
A
Horizontal stripes
A a B b C
A a B b C
A a B b C
A a B b C
A a B b C
Curl
Copying problems
CONDITION
Copies are too light or too
dark
Smears, lines, marks, or
spots appear on copies.
Copy image is skewed.
Blank copies print out.
Image rubs off the copy
easily.
•
Clean the inside of the machine (See "Cleaning the inside" on page 48).
•
Check the paper type and quality (See "Print media specifications" on page 71).
•
Remove the toner cartridge and then, install a new one (See "Replacing the toner
cartridge" on page 68).
•
If the problem persists, the machine may require repair. Contact a service representative.
Character voids are white areas within parts of characters that should be solid black:
•
You may be printing on the wrong surface of the paper. Remove the paper and turn it
around.
•
The paper may not meet paper specifications (See "Print media specifications" on
page 71).
If horizontally aligned black streaks or smears appear:
•
The toner cartridge may be installed improperly. Remove the cartridge and reinsert it.
•
The toner cartridge may be defective. Remove the toner cartridge and install a new one
(See "Replacing the toner cartridge" on page 68).
•
If the problem persists, the machine may require repair. Contact a service representative.
If the printed paper is curled or paper does not feed into the machine:
•
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Use Darkness in Copy Setup to lighten or darken the backgrounds of copies (See
"Changing the darkness" on page 31).
•
If the defects are on the original, use Darkness in Copy Setup to lighten the
background of your copies (See "Changing the darkness" on page 31).
•
Ensure that the original is face down in the document feeder.
•
Check that the copy paper is loaded correctly.
Ensure that the original is face down in the document feeder.
•
Replace the paper in the tray with paper from a new package.
•
In high humidity areas, do not leave paper in the machine for extended periods of
time.
Troubleshooting_ 65
SUGGESTED SOLUTIONS
SUGGESTED SOLUTION
Advertisement
Table of Contents
