Media And Tray; Preparing Originals; Loading Originals; In The Document Feeder - Samsung SF-650 User Manual

M edia and tray
3 .
This chapter provides information on how to load originals and print media into your machine.
This chapter includes:
•

Preparing originals

•

Loading originals

• Selecting print media
• Changing the tray size
• Loading paper in the tray
• Setting the paper size and type
• Using the output support
Preparing originals
• Do not load paper smaller than 148 x 148 mm (5.8 x 5.8 inches) or larger than 216 x 356 mm (8.5 x 14 inches).
• Do not attempt to load the following types of paper, in order to prevent paper jam, low print quality and machine
damage.
- Carbon-paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely dry before loading.
• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents with other unusual characteristics.
Loading originals
You can use the automatic document feeder to load an original for copying and sending a fax.

In the document feeder

Using the document feeder, you can load up to 20 sheets of paper (75 g/m
1. Flex or fan the edge of the paper stack to separate the pages before loading originals.
2. Pull the document input tray or document output tray all the way out. Fold out the extender, if necessary.
2
, 20 lb bond) for one job.

Media and tray_ 26