Samsung FX 505 Operator's Manual page 19

Receiving in AUTO-RCV
Mode
1. To select the AUTO-RCV mode, press
[RECEIVE MODE] repeatedly until the
indicator on the key lights and the
window displays as shown below.
2. When you get a call, the unit
automatically receives the document.
When a call is received from a
l l
m a n u a l f a x m a c h i n e ,
your unit
answers the call after several rings
which you can set through the User
Options, and sounds a fax tone to
the caller. The caller hears the tone,
and should know to press the
START key on their machine. Then
your unit receives the fax.
When a call is received from an
l
automatic fax machine, y o u r u n i t
automatically detects the sending fax
machine and receives the
automatically.
l If you pick up the handset before your
unit answers, the unit switches back to
TEL mode.
l Even when a fax tone is on the line, the
unit might fail to detect it and doesn't
receive the fax because of the line
instability.
Receiving
Receiving in ANS/FAX Mode
To use ANS/FAX receiving mode, you
l l
have to install an answering machine
(see page 10). This mode is not
applicable for the standard phone
Installed in EXT.TEL jack.
1. To select the ANS/FAX mode, press
[RECEIVE MODE] repeatedly until the
indicator flickers and the window
displays as shown below.
2. When a call is received, the answering
machine answers
recorded outgoing message.
If a fax tone or a certain time period of
silence is detected on the line by your
fax machine -the call automatically
switches over to the fax machine and
reception begins,
fax
answering machine's announcement.
If someone wants to speak with
you-your fax machine ignores the
call. The caller can leave a message
on the answering machine.
c o n t i n u e d
l If you have troubles receiving faxes in the
ANS/FAX mode, change the silence
detection time mode as described on Page
37. This feature in the user options will
ensure fax reception when a fax tone is
not detected on the line by your fax
machine.
l When only fax messages are received, your
answering machine may still indicate a
voice message has been left, even though
none were actually received.
l l If the sound level of the incoming caller is
too low due to a poor telephone
connection, the fax machine and/or
answering machine may not function
properly.
l l If the answering machine does not answer
within 6 rings for such reasons that
recording message is full on the tape or
a n d p l a y s t h e
the answering machine is switched off,
your fax unit automatically switches to the
TEL/FAX mode and takes the call
according to the steps described in
"Receiving in TEL/FAX mode." If the
answering machine is featured with a user-
selectable ring counter, set the machine to
overriding the
answer an incoming call within 4 rings.
l When you are using the TEL mode on your
unit and an answering machine is installed,
you must make sure you switch off the
answering machine, otherwise the OGM
from the answering machine will disrupt
your telephone conversation.