ABB ACS 600 Installation Manuals page 2
Hide thumbs
Also See for ACS 600:
- Hardware manual (52 pages) ,
- Supplement to firmware manual (42 pages) ,
- Startup manual (10 pages)
Advertisement
2.
Earthing Wires
and the cable shield
1.
X2
2.
ABB Industry Oy
Drives
1.
10
1. Connect the control panel
cable to connector X2.
2. Replace the front cover.
P.O. Box 184 FIN-00381 Helsinki
8
9
3.
Standard
Input/Output
Connections: See
the Start-up
Guide or Manual.
300 mm
free space
tel: +358-10 22 2000
1. Connect the motor cable.
2. Connect the mains cable.
Ensure proper earthings.
For minimal radio frequency
interference (RFI) at the motor
end:
1. Twisted screen:
Diameter (Ø) > 1/5 · Length (L),
L
or
2. Screen 360° earthing at cable
lead-through.
Control cable installation:
1. Make hole in a control cable
grommet and lead the cable into
the unit.
2. Connect the earthing wires
and the cable shield to the
earthing terminal next to the
NIOC board.
3. Connect the control cables to
the input/output terminals.
fax: +358-10 22 22681
Ø
Advertisement
