Table of Contents
Advertisement
Attaching the Lens / Detaching the Lens (continued)
■ Case 2
z PT-RQ13K / PT-RZ12K / PT-RS11K
z PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2
z PT-DZ13K / PT-DS12K / PT-DW11K / PT-DZ10K
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
3D SETTINGS
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
PROJECTOR SETUP
INITIAL STARTUP
STARTUP INPUT SELECT
DATE AND TIME
TIME ZONE
RS-232C
REMOTE2 MODE
FUNCTION BUTTON
LENS CALIBRATION
LENS MEMORY
STATUS
AC VOLTAGE MONITOR
SAVE ALL USER DATA
MENU SELECT
CHANGE
SET
ENTER
LENS CALIBRATION
Proceed LENS CALIBRATION,
and return to HOME POSITION.
OK
CHANGE
EXECUTE
ENTER
Note
z The lens position set here may not match the intended standard position exactly.
z Even after moving the lens to the home position with this procedure, you can adjust the position of the
projected image within the lens shift ranges shown in the "Lens shift ranges" (
2/3
LAST MEMORY
LAST USED
OFF
DEFAULT
NORMAL
OFF
CANCEL
1) Press the <MENU> button.
z The [MAIN MENU] screen appears.
2) Use the ▲ and ▼ buttons to select
[PROJECTOR SETUP].
3) Press the <ENTER> button.
z The [PROJECTOR SETUP] screen appears.
z Set [PROJECTION METHOD] to [FRONT/CEILING]
or [REAR/CEILING] for floor installations or [FRONT/
FLOOR] or [REAR/FLOOR] for ceiling installations.
4) Use the ▲ and ▼ buttons to select
[LENS CALIBRATION].
5) Use the ◄ and ► buttons to select
[NORMAL].
6) Press the <ENTER> button.
z The confirmation screen appears.
7) Use the ◄ and ► buttons to select [OK],
and press the <ENTER> button.
z Lens calibration starts.
z The projection lens moves to the home position after
adjustment range calibration is complete.
Page 14).
ENGLISH-9
Advertisement
Table of Contents
