F O R T H E S E R V I C E P R O V I D E R
Get a Quick Start
Your Mediaflex router has a
basic default configuration
for auto-provisioning process
described below. However,
if you wish to change any of
the default parameters (SSID,
encryption type, encryption
key, password etc.), you must
configure the Mediaflex router
before performing the auto-
provisioning set-up
(see User Manual).
1
Plug in A/C adapters and connect
to Ruckus router and adapter.
2
Autoprovision by directly connecting Ruckus router
to Ruckus adapter with an Ethernet cable (supplied)
2 right LEDs are blinking
Autoprovisioning
3
Plug one end of the Ethernet cable into LAN port
of DSL modem or broadband gateway and the
other into the WAN port of the MediaFlex router
4
Attach Ruckus adapter to receiving devices
(eg. set top box, game machine, computer, etc.),
to ensure connectivity and
laptop to connect o the Internet
062906
D E F A U L T S
Network name
Security
IP addressing
Username/Password
If you have PPPoE service
turn over for instructions
Adapter
When autoprovision
complete, disconnect cable
ADAPTER LEDs
in process
MediaFlex Router
V54-xxxxxx (provider)
(where xxxx is the last 6-digits of MAC address)
V54-HOME001 (user)
WPA-PSK (provider SSID)
Disabled (user SSID)
192.168.1.1 (router LAN ports)
192.168.0.1 (router WAN port)
192.168.0.254 (adapter)
u/n: super
p/w: sp-admin (provider)
u/n: admin p/w: password (user)
Router
2 right LEDs are off
Autoprovisioning
complete
turn on TV
turn on wireless
(optional)
Power
Signal
Indicator
Quality
WLAN
WAN
Device
Connectivity
Association
L E D G U I D E
(complete explanation of LED behavior in User Manual)
Power on
Green
WAN connected
green=100 Mbps
amber=10 Mbps
Green/Amber
No associated
devices
Amber
Device(s)
associated
Green
Associated station
with lowest signal
strength connected
perfectly
Green
Blinking
Associated station
with lowest signal
strength connected
OK
Green
Blinking
Associated station
with lowest signal
strength connected
poorly
Green/Red
Hardware problem
Red
g
Need help?
Do you have a question about the MediaFlex 2111 and is the answer not in the manual?
Questions and answers