Thermo Scientific iCAP 6000 Series Preinstallation Manual page 20

Optic nitrogen purge (Optional)
Regulator valve in wall 0 – 10 bars (0 – 100 Psi)
Gas union dimension at the exit of the regulator valve
Maximum distance between the instrument and the regulator
valve
Purity of nitrogen (Gas or Liquid)
Pressure required at the input of spectrometer
Waste
Waste container, a minimum of 5 l for liquids waste
Auto Sampler rinse and waste
Minimum 1l container for the rinse supply station and waste
Chiller (if not bought with the instrument)
Maximum distance from the spectrometer
Pipe supply O.D. dimension
Cooling capability
Flow rate
Chiller inhibitor
PC and printer (if not bought with the machine)
512 Mb RAM, 40 Gb HDD, 2 Ethernet ports, 1 serial port,
USB ports, monitor, ink jet printer
Windows XP Professional (Service pack 2)
Caution: The instrument installation will not start before
Thermo Fisher receives this document back completed. In the
case of false information causing the installation to be stopped, a
travel cost may be charged.
I certify the exactness of the information supplied in this document.
Name:
Signature:
Date:
Installation Manual v3.1
Yes
6 mm (1/4 inch
adapter supplied
with instrument)
2 m
99,995% 0
ppm H
ppm
6 bar (87 Psi)
Yes
2 needed
3 m
12 mm
900 W
5 l/min
Yes
Yes
Yes
Position:
Company stamp:
Thermo Fisher Corporation
<10
2
0<10
2