Replacing The Batteries - EPH Controls CRT2 Operating Instructions

CRT2 Room Thermostat
10. High and Low temperature limitation
An upper and lower temperature limit may be chosen.
Set
Press and hold the and
Limit
will appear on the screen.
OFF
Use the button to select
Press the Set button to select high limit.
Press the and buttons to select high limit temperature.
Set
Press the button to select low limit.
Press the and buttons to select low limit temperature.
Set
Press the button and the thermostat is ready for operation.
Limit will appear on the screen.
To deactivate High and Low temperature limitation.
Set
Press and hold the and
Limit
will appear on the screen.
ON
Use the button to deactivate this function.
Limit
will appear on the screen.
OFF
Set
Press the button and the thermostat is ready for operation.

11. Replacing the batteries

Slacken the fastening screw on the bottom of the thermostat with a
philips head screwdriver.
The thermostat is hinged and can be opened 180 degrees.
Replace the batteries with 2 x AA Alkaline batteries.
Close the thermostat and tighten the fastening screw.
buttons for 10 seconds.
Limit
.
ON
buttons for 10 seconds.
EPH Controls Ireland
Sitecast Industrial Estate, Pouladu ,
Cork, T12 W665, Ireland
sales@ephcontrols.com www.ephcontrols.com
Battery Operated
OFF
EPH Controls UK
Unit E4, Welland Business Park, Valley Way, Market Harborough,
Leicestershire, LE16 7PS, United Kingdom
sales@ephcontrols.co.uk www.ephcontrols.co.uk
Page 2 of 2
Operating Instructions