Printer Operation - Sanyo ECR 160 Instruction Manual

Printer Operation
For opening the journal protection cover, squeeze top
of it, and lift it up.
1. Loading of Paper Tape
(1} Remove the old roll paper by tearing the paper
( in half just behind the printer.
(2} Advance the remaining paper through the printer
using the
(!)
key.
(
(3) Install a new roll paper and fold the end of paper
as shown below. (not to fold obliquely}
Fig.
5
(4} Put the paper in straight between Outer and
Inner paper guides.
o-~
p,"' , --o
~
Printer
0
X
Fig. 6
(5) Depress the
[!]
key to feed the paper and put
the paper by hand.
-7-
(6) Insert the folded end into the slit of the rewind
shaft. Then fit the ends of the rewind shaft into
the upper notches and place it over the roll paper.
I
I
I
I
, ___ .J
Printer
Fig. 7
(7} In order to take out the wound paper, take out
the rewind shaft from the paper holder and draw
out the wound paper horizontally after loosening
it a little by twisting the shaft.
Wound paper
. .
Rewind shaft
Paper stopper
Fig. 8