Sanyo ECR 160 Instruction Manual page 10

2. Replacement of the paper
Just before the paper runs out, a coloured part will
appear to remind you that a new paper roll must be
inserted.
3. Replacement of Ink Ribbon
Remove the ribbon spool from the axis by turning
the spool lever. Insert a new ribbon into the axis by
turning the spool lever in the same way as it was
removed. Then set the ribbon as indicated in the
Fig. 9.
Use heavy dencity ink ribbon.
Axis
bik Ribbon
Spool Lever
Fig. 9
-8-
4. Suggestions for Operation
(1) Do not impede the rotation of the drum by
pulling the paper or inserting foreign object.
(2) Do not lubricate the machine.
(3) In case of trouble, consult your dealer.
(4) Do not remove the journal protection cover
during operation.
5. When the paper jam occurs
Do not pull the paper by force, or keep depressing
the [!]key.
Pull the paper forward or backward. If one or
more pieces of paper remain inside, remove them with
tweezers.
When this is impossible by the above method, take
off platen cover and remove paper with tweezers.
Take off platen cover from concave part of Frame
with tweezers.
Platen cover
Tweezersn-
____
_......
==1··F<>m<
Fig. lO
(
(