CHAPTER 2. Ошибка! Стиль не определен.
2.4 Installing on a Wall
This section describes how to install the OfficeServ 7100 cabinet on a wall.
2.4.1 Tools Required
Mid-sized Phillips screw driver
Electric drill
Hammer
Wall-type bracket
Four plastic anchors
Four cross-type screws
Four Mount locking screws
2.4.2 Installing on a Wall
The way to install the OfficeServ 7100 cabinet by using a wall-type bracket is as follows:
1) There are four holes for the screws on the top/bottom of the bracket(A positions of the
figure below). Mark four holes on a desired wall by using the bracket.
2-4
Figure 2.5 Required Tools for the installation on a Wall
A
A
Figure 2.6 Installation on a Wall (1)
© SAMSUNG Electronics Co., Ltd.