Preparing A Document - Samsung FX1600 Operator's Manual

T F M
HE AX A C H I N E

Preparing a Document

The FX600/1600 can transmit documents with the following sizes:
215.91mm
M a x i m u m
Up to a maximum of
998mm
DO NOT attempt to feed the following document types into the unit, as they may jam.
Instead, make a photocopy, and send the copy.
Wrinkled or creased
paper
Carbon or carbon-backed Coated paper
paper
Remove clips, staples, and similar objects from documents before feeding them
into the unit.
Let ink or paste dry completely before you send documents.
Do not try to load two or more documents into the machine if the documents are
too thin or too thick. These documents might not go through properly. Feed one
sheet at a time. Check the chart below, to see what is acceptable.
Thickness of
document
Make a copy of any document that is too thin or too thick to send by using an
office copier. Non-standard paper dimensions may cause feeding problems.
145mm
127mm (length)
Minumum
Curled or rolled paper
or fax paper
Up to five sheets Up to ten sheets
Single sheet
0.075mm, to
0.083mm, to
0.15 mm
0.13 mm
Tom paper
Too thin (less than 0.075mm)
or thick (more than 0.15mm)
paper
0.085 to 0.13 mm
C T : T F M
HAPTER HREE HE AX ACHINE
3.15