Logging In To Ilo For The First Time; Ilo Default Credentials; Ilo Licensed Features - HP HPE iLO 5 User Manual

The System Utilities start.
4. Click System Configuration, click iLO 5 Configuration Utility, click User Management, and then
click Edit/Remove User.
5. In the Action menu for the user you want to remove, select Delete.
The user name is marked to be deleted when you save the changes on this page.
6. If needed, mark other user accounts to delete, and then press F12 to save the changes and exit the
system utilities.
7. When prompted to confirm the changes, click Yes - Save Changes to exit the utility and resume the
boot process.

Logging in to iLO for the first time

Procedure
1. Enter https://<iLO hostname or IP address>.
HTTPS (HTTP exchanged over an SSL encrypted session) is required for accessing the iLO web
interface.
2. Enter the default user credentials, and then click Log In.

iLO default credentials

The iLO firmware is configured with a default user name, password, and DNS name. The default
information is on the serial label pull tab attached to the server that contains the iLO management
processor. Use these values to access iLO remotely from a network client by using a web browser.
• User name—Administrator
• Password—A random eight-character string
• DNS name—ILOXXXXXXXXXXXX, where the X characters represent the server serial number.
IMPORTANT:
Hewlett Packard Enterprise recommends changing the default password after you log in to iLO for
the first time.
If you reset iLO to the factory default settings, use the default iLO account credentials to log in after
the reset.

iLO licensed features

iLO (Standard) is preconfigured on Hewlett Packard Enterprise servers without an additional cost or
license. Features that enhance productivity are licensed. For more information, see the iLO licensing
guide at the following website: http://www.hpe.com/support/ilo-docs.
To activate iLO licensed features, install an iLO license.
Logging in to iLO for the first time 27