Hitachi Compute Rack CR 210H User Manual page 68

Memory Error. Please check the SDRAM
connection. If problems persist contact Tech
Support.
Memory Error. Detected Unsupported RAID
Controller Memory.
Contact Tech support.
Unrecoverable Error. Please check the
SDRAMconnection.
If problems persist contact Tech Support.
This is a TEST message.
Press any key to ignore it, or wait 5 seconds.
No further action is required.
Press any key to continue, or C to load the
configuration utility.
This firmware is an ALPHA version.
It has not completed all validation.
This firmware is a BETA version.
It has not completed all validation.
This firmware is a TEST version.
It has not completed any validation.
The firmware version inconsistency was
detected. The adapter was recovered, but
cached data was lost.
Press any key to continue or press C to load
the configuration utility.
Firmware Failed Validation. Adapter needs to
be refreshed.
The most recent configuration command
could not be committed and must be retried.
Press any key to continue, or press C to load
the configuration utility.
Previous configuration cleared or missing.
Importing configuration created on X/Y
X:Y
Press any key to continue or press C to load
the configuration utility.
An enclosure was found that contains both
SAS and SATA drives, but this controller does
not allow mixed drive types in a single
enclosure.
Correct the problem and restart your system.
Press any key to continue or press C to load
the configuration utility.
SAS drives were detected, but this controller
does not support SAS drives.
Remove the SAS drives and restart your
system.
Press any key to continue or press C to load
the configuration utility.
6-10
Error message
Troubleshooting
Hitachi Compute Rack 210H User's Guide
Description
A cache memory error has occurred in
the disk array controller.
A cache memory error has occurred in
the disk array controller.
A cache memory error has occurred in
the disk array controller.
Test message
The firmware is of alpha version.
The firmware is of beta version.
The firmware is of test version.
Firmware version inconsistency has
been detected.
Firmware version inconsistency has
been detected.
The disk array configuration information
has been cleared or missing.
The disk array configuration information
has been cleared or missing.
The disk array controller is working with
illegal parameters.
The disk array controller is working with
illegal parameters.
Action
(*1)
(*1)
(*1)
(*1)
(*1)
(*1)
(*1)
(*1)
(*1)
(*1)
(*1)
(*1)
(*1)