Solving Problems - Hitachi Compute Rack CR 210H User Manual

Solving problems

This section describes how take measures against various cases.
Table 6-1: Solving problems
No
1 Initial failure or missing part
Some users do not know how to
use equipment or have
2
questions about manual's
descriptions.
System unit does not work
3
normally or an error occurs.
System unit infected with a
4
computer virus.
Want to change the disk array or
5
know the operation of disk array
6 Want to extend a function.
7 Others
6-2
Description
Troubleshooting
Hitachi Compute Rack 210H User's Guide
Point to be checked and action to be taken
● Check the system unit for missing parts or damage
against the accessories checklist.
● After delivery, check the operation of system unit for
initial failures.
● If initial failures or missing parts are found, contact the
sales representative.
● See the documents of devices.
● For any questions on a manual's description, contact
the sales representative.
● See Corrective actions for error
● Disconnect the network cable and follows the
instructions mentioned in the manual attached to your
anti-virus software.
● Start setup with the RAID BIOS "MegaRAID WebBIOS".
For details on the RAID BIOS, see Hitachi Compute
Rack 210H/220H BIOS Guide.
● Also, see MegaRAID Storage Manage Instruction
Manual.
● For addition of another optional device or software,
contact the sales representative.
● For any other questions, contact the sales
representative.
on page 6-3.