Russound CAV6.6-S2 Instruction Manual
  1. Manuals
  2. Brands
  3. Russound Manuals
  4. Amplifier
  5. CAV6.6-S2
  6. Instruction manual

Russound CAV6.6-S2 Instruction Manual

6-zone, 6-source audio/video controller amplifier
Hide thumbs Also See for CAV6.6-S2:
Table of Contents

Advertisement

Quick Links

CAV6.6-S2 System
6-Zone, 6-Source
Audio/Video Controller Amplifier
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAV6.6-S2 and is the answer not in the manual?

Questions and answers

Related Manuals for Russound CAV6.6-S2

Summary of Contents for Russound CAV6.6-S2

  • Page 1 CAV6.6-S2 System 6-Zone, 6-Source Audio/Video Controller Amplifier INSTRUCTION MANUAL...

  • Page 2: Important Safeguards

    Select the plug for your area at one end and a IEC320 con- nector at the other. It is not necessary to make any other changes. If you have any questions please call Russound Inc. at 1-800-638-8055 or 603-659-5170 Safety Instructions: 1.

  • Page 3: Table Of Contents

    USER SECTION Product Introduction...6 Component Guide CAV6.6 Controller...7-8 UNO-S2 Keypad ...9 UNO-S1 Keypad ...10 UNO-LRC1 Remote Control ...11 Operation CAV6.6 Controller ...12 UNO-S2 Keypad Button Functions...13 UNO-S2 User Menu - Setting Preferences...14 Optional UNO-S1 Keypad UNO-S2 User Menu ...15 UNO-S1 User Menu - Setting Preferences...16 INSTALLER SECTION Getting Started Unpacking ...18...
  • Page 4 TABLE OF CONTENTS RNET Link In/Out - Multiple Controllers...40 RNET Link In/Out - RNET-enabled Components ...41 RS-232 Interface ...42 Programming Center Keypad Port Connection...43 Firmware Updates UNO-S2 Keypad Diagnostic Menu ...44 UNO-S2 Keypad Firmware Update Procedure ...45 CAV6.6 Firmware Update Procedure...46 PC Power Tool Programming...47 Initial Install Test ...48 Programming...

  • Page 5: User Section

    Component Guides Explains front panel features of the CAV6.6 controller, UNO-S2 keypad, optional UNO-S1 keypad and UNO-LRC1 remote control. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available through the User Menu. USER SECTION...

  • Page 6: Product Introduction

    Here at Russound we are proud to continue providing innovative and intuitive A/V product solutions to the world. When you link the industry-leading CAV6.6-S2 system with Russound’s commitment to its...

  • Page 7: Cav6.6 Controller-Front Panel

    CAV6.6 Controller-Front Panel MAIN POWER SWITCH - Supplies power to the CAV6.6 REMOVABLE COVER LENS - Covers the connections on the front of the CAV6.6 ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red) ROOM LABEL WINDOW - Holds the selected room Label (included) AUX A/V LINE INPUTS - Supports connection of a seventh A/V source to the CAV6.6 AUX IR OUT PORT - Connects IR emitter for IR control of the Aux A/V source component...
  • Page 8 The AUX IR jack adjacent to the line input accepts an IR Emitter with a 1/8” plug (e.g., Russound 845.1 IR emitter). The emitter’s other end attaches to the IR window of the component to control the auxiliary source.

  • Page 9: Uno-S2 Keypad

    UNO-S2 Keypad-Front Panel LCD PANEL - 12-character backlit display shows status of the room, source, volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the CAV6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room IR RECEIVER - Receives IR signals and passes them to the controller and source equipment.

  • Page 10: Uno-S1 Keypad

    USER COMPONENT GUIDE Optional UNO-S1 Keypad-Front Panel LCD PANEL - 5-character backlit display shows source, volume and room status (messages scroll, then display first 5 characters of message) SOURCE SELECT - Scrolls through the available sources. Press and hold brings up the USER MENU for loudness, bass, treble, etc.

  • Page 11: Uno-Lrc1 Remote Control

    UNO-LRC1 Remote Control LOCAL DEVICE BUTTONS - Select local source to be controlled by UNO-LRC1. SETUP - Use for programming UNO-LRC1 using the built-in library or by learning-in codes. UNO SOURCE BUTTON - Selects UNO Keypad for control by UNO-LRC1. ROOM ON/OFF - Turns room on and off while in the UNO mode.

  • Page 12: User Operation

    USER OPERATION CAV6.6 Controller UNO-S2 Keypad MODE: “DND”- Do Not Disturb “SHARED”- Same source selected in multiple rooms “SYS-ON”- Indicates system on “PARTY”- Party Mode enabled “MASTER”- Master Keypad in Party 12-character display Volume Indicator Indicates the middle of setting range Main Power and Zone Status The power switch for the CAV6.6 controller is "on"...

  • Page 13: Uno-S2 Keypad Button Functions

    UNO-S2 Keypad Button Functions Zone On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAV6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc.

  • Page 14: Uno-S2 User Menu - Setting Preferences

    USER OPERATION UNO-S2 User Menu - Setting Preferences The User Menu allows the user to adjust the audio properties and control functions of a par- ticular room. The following keys are used to navigate and make changes while using the User Menu: To enter the User Menu, press and hold ing normal operation.

  • Page 15: Optional Uno-S1 Keypad Uno-S2 User Menu

    Optional UNO-S1 Keypad Button Functions The optional UNO-S1 keypad operates in a similar manner as the UNO-S2 keypad. Zone On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc.

  • Page 16: Uno-S1 User Menu - Setting Preferences

    USER OPERATION Optional UNO-S1 User Menu - Setting Preferences The UNO-S1 User Menu allows the user to adjust the audio properties and control func- tions of a particular room. To enter or exit the User Menu, press and hold during normal operation. The following keys are used to navigate and make changes while using the User Menu: Press and hold to adjust feature setting...

  • Page 17: Installer Section

    INSTALLER SECTION Getting Started Includes an installation overview, including tools needed and wiring instructions. Component Guides Reviews front and back panel features of the CAV6.6 controller and the UNO-S2 keypad. Keypad Installation Explains UNO-S2 keypad installation and wiring. Making Connections Details front and back panel connections of the controller and the keypad.

  • Page 18: Getting Started

    • Check for any visible signs of damage. If you encounter any concealed damage, con- sult your Russound dealer before proceeding to install the unit. • Retain the sales receipt as it establishes the duration of the limited warranty and provides information for insurance purposes.

  • Page 19: Wiring Instructions

    RJ-45 Connections The CAT-5 T568A wiring stan- dard shown on the right is used for the RJ-45 terminations. Keypad Wiring For the UNO keypad, the following connections are used to terminate the CAT-5 wire to the 110 punchdown on the keypad: CAT-5 WIRE COLOR Brown .

  • Page 20: Component Guide

    INSTALLER COMPONENT GUIDE CAV6.6 Controller-Front Panel...
  • Page 21 CAV6.6 Controller-Front Panel PROGRAM SELECTOR COVER - Protects the Program Selector Switch KEYPAD PROGRAMMING PORT - Accepts an RJ-45 terminated UNO keypad to program certain features of the CAV6.6 FRONT/REAR RS-232 SWITCH - Selects front or rear RS-232 connection for optional PC connection during programming RS-232 INTERFACE - The RS-232 Interface on the front and on the rear, allows the zones to be controlled by PC or other devices that have an RS-232 Interface.

  • Page 22: Cav6.6 Controller Rear Panel

    UNO KEYPAD PORTS - One UNO Keypad Port for each of the six CAV6.6 Zones 24VDC 2.5A INPUT - Provides power to the A-BUS READY SUB-ZONES when used with a 24VDC 2.5A power supply (e.g., Russound A-PS) ZONE AUDIO/VIDEO OUTPUTS - Variable line audio with fixed video, used to connect...
  • Page 23 A-BUS READY SUB-ZONES - A-BUS Amplified Control Modules and Hubs can be added for additional sub-zones of audio (Zones 1 to 4 only) R-NET LINK IN AND LINK OUT - Links multiple CAV6.6’s, also links future Russound components that are R-NET compatible RS-232 INTERFACE - The RS-232 Interface on the rear and on the front, allows the zones to be controlled by PC or other devices that have an RS-232 Interface.

  • Page 24: Uno-S2 Keypad Front Panel

    INSTALLER COMPONENT GUIDE UNO-S2 Keypad-Front Panel SETUP BUTTON - Activates Installer Setup Mode for the UNO-S2 keypad OS UPDATE PORT - Port used for UNO keypad OS software updates DATA Rx (RS-232) DATA Tx (RS-232) +12VDC...

  • Page 25: Uno-S2 Keypad Rear Panel

    UNO-S2 Keypad-Rear Panel EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver. OS UPDATE JUMPER - Selects “Run” or “OS Update” mode. RESET BUTTON - Reset whenever changing from RUN to OS update 110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between the UNO-S2 Keypad and the CAV6.6 controller.

  • Page 26: Uno-S2 Keypad Installation Keypad Location

    INSTALLER UNO-S2 KEYPAD-INSTALLATION Keypad Location The best infrared remote performance is achieved with the keypad away from any direct sunlight, plasma TV, and low voltage lighting controls. Also consider convenience when choosing a location. Choose a place that is easily seen from the posi- tion where a person is most likely to be located.

  • Page 27: Keypad Connections

    UNO-S2 Keypad operating system software in the future. When an update is released, it will be available online through the Document Center at www.russound.com. Look for the Technical Documents under Multi-source/Multi-room prod- ucts. The programming cable is available from Russound, Part #2500-120633.

  • Page 28: Ir Receiver Connection

    IR Receiver Connection The UNO-S2 keypad has an External IR Receiver In terminal for connecting an external IR receiver such as the Russound SaphIR 858, 862 Eye, or 860 Phantom. Use 2 twisted pair wire with Back of Russound 858...

  • Page 29: Making Connections

    UNO System Keypad Port Connection The UNO System Keypad Ports are located on the back of the CAV6.6 in the top left corner. Connections made at the UNO Keypad Ports are made using CAT-5 T568A RJ-45 wire configura- tion. CAT-5 is color-coded for ease of installa- tion.

  • Page 30: Source Audio/Video Input Connections

    Each source component has a designated IR port on the back of the CAV6.6. This IR port is directly below the Source Audio/Video Input/Output Connections. 1. Using an IR emitter (the Russound 845.1 is recommended) attach the end of the emitter ” with the 1/8 plug to the IR emitter port below the source input.

  • Page 31: Source Audio/Video Loop Output Connection

    Source Audio/Video Loop Output Connections The CAV6.6 has six buffered, fixed-level audio/video source loop outputs. This source loop configuration allows the CAV6.6 to pass source signals to another component, such as a home theater receiver or to another CAV6.6 for sharing MAKING CONNECTIONS sources in a multiple controller system.

  • Page 32: Speaker Connections

    INSTALLER MAKING CONNECTIONS Speaker Connections The speakers are connected to the CAV6.6 using modular snap speaker connectors. Each of these color coded connectors is designated for the speaker set of a particular amplified zone. To avoid confusion, connect one zone speaker set at a time starting with Zone 1, tak- ing care to keep zone and speaker wire identi- ties straight.

  • Page 33: Accessory Ir Connection

    The connection for the ACC IR jack is made using an IR emitter with the 1/8’’ plug. The Russound MAKING CONNECTIONS 845.1 single IR emitter is recommended, or use...

  • Page 34: Zone Audio/Video Outputs

    Zone Audio (to Amp) and Video Outputs The CAV6.6 has six Zone Audio/Video outputs. The Variable Audio outputs can be used if addi- tional amplification is desired (e.g., Russound DPA-1.2 two-channel amplifier). The Zone Audio/Video Outputs are located slightly to the left of center on the rear of the CAV6.6.

  • Page 35: A-Bus Ready Sub-Zone Connection

    A-BUS Ready Sub-zone Connection A-BUS products can easily expand the CAV6.6 audio system by adding A-BUS Ready Sub-zones to the first four CAV6.6 zones. The A-BUS Ready Sub-zones are located on the back of the CAV6.6 at the bottom left corner. The A-BUS Ready Sub-zones are powered by a 24VDC power supply such as the A-PS.

  • Page 36: 12Vdc Trigger In/Out

    12VDC 50mA Trigger Out The 12VDC 50mA trigger out can be used to engage any 12VDC trigger device or component such as the Russound ACT-1 triggered outlet. The connections for the trigger out are made using a two-conductor cable with 1/8” male mini-plug jacks at each end.

  • Page 37: Zone Trigger Out

    The trigger can be used to engage any 12VDC trigger device or component such as the MAKING CONNECTIONS Russound DPA-1.2 amplifier. The connections for the trigger outputs are made using a two-con- ductor cable with 1/8” male mini-plug jacks at each end.

  • Page 38: Page Trigger In/Out

    (-). This allows for the con- nection of an external paging or muting device such as the Russound DIM-1 Doorbell Interface Module. The CAV6.6 can be programmed to mute audio and video for one or all zones as pre- ferred when the 12VDC is applied.
  • Page 39 INSTALLER MAKING CONNECTIONS 12VDC Trigger In/Out...

  • Page 40: Rnet Link In/Out - Multiple Controllers

    INSTALLER MAKING CONNECTIONS RNET Link In and Link Out - Multiple Controllers The RNET Link In and Link Out is used to con- nect two or more (up to 6) CAV6.6 or CAM6.6 controllers. The connection is made using a CAT-5 patch cable from the Link Out of the mas- ter controller and into the Link In of the next controller.

  • Page 41: Rnet Link In/Out - Rnet-Enabled Components

    RNET Link In and Link Out - RNET-enabled Components The RNET Link In and Link Out is also used to connect the CAV6.6 to other Russound RNET-enabled products. The connection is made using a CAT-5 patch cable from the Link Out of the controller and into the Link In of the RNET- enabled component.

  • Page 42: Rs-232 Interface

    The switch is located next to the DB-9 port. For RS-232 protocol, available firmware updates and the RNET Backup Utility, see the Document Center at www.russound.com. Look for the Technical Documents under Multi-source/Multi- room products.

  • Page 43: Programming Center Keypad Port Connection

    Programming Center Keypad Port Connection The CAV6.6 can be programmed via keypad connection using CAT-5 and the T568A RJ-45 wire configuration. An UNO-S2 Keypad can be attached to the controller at the Programming Center Keypad Port Connection. The Programming Center Keypad Port is designed for use in local programming, specifi- MAKING CONNECTIONS cally for learning IR commands directly into the...

  • Page 44: Firmware Updates

    INSTALLER FIRMWARE UPDATES UNO-S2 Keypad Diagnostics Menu The Diagnostics Menu allows the installer to run a diagnostic check on the keypad and to verify the firmware version. The Diagnostics Menu also contains the update firmware procedure for updating the UNO-S2’s firmware. To access the Diagnostics Menu, press and hold the Setup button on the right side of the keypad until “DIAGNOSTICS”...

  • Page 45: Uno-S2 Keypad Firmware Update Procedure

    2. Available DB-9 serial RS-232 data port (baud rate= 38400, data bits = 8, no parity, 1 stop bit, no flow control) 3. UNO serial Programming Cable (Russound P/N 2500-120633 4. Flash Magic - Philips IC update application (Flash Magic can be downloaded for free at: http://www.esacademy.com/software/flashmagic/flas...

  • Page 46: Cav6.6 Firmware Update Procedure

    Update Procedure: Remove cover lens from CAV6.6 front panel. Remove the “Russound” program selector switch cover with a small flat blade screwdriver. Connect the DB9 serial cable between the PC COM port and one of the DB9 ports found on the front and rear panels of the CAV6.6.

  • Page 47: Pc Power Tool Programming

    PC Power Tool Programming The PC Power Tool is a custom software pro- gram that provides an easy way to program the CAV6.6 using a PC to upload the program set- tings to the controller via a serial cable. System requirements for PC Power Tool: 1.

  • Page 48: Initial Install Test

    4. Check to see that the keypad is connected to the Zone #1 Keypad Port and verify the CAT-5 is properly terminated at both ends. If none of these steps produce successful results, call Russound Tech Support for further assistance.

  • Page 49: Programming

    INSTALLER PROGRAMMING System Programming Overview This manual includes items that are designed to assist in the programming process. Sample Configurations (Pages 84-95) A series of sample configurations are provided to showcase a variety of system designs and compo- nent options. Forms (pages 51-53) Three blank reproducible forms are included as planning tools when determining sources, settings and zone preferences.
  • Page 50 INSTALLER PROGRAMMING System Programming Overview (cont’d) 2. Number of Sources (# of Sources/SOURCE SETUP) (Page 61) This procedure sets the number of sources used in the system. This prevents the user from selecting a source input that is not used. 3.

  • Page 51: Source Information Form

    INSTALLER PROGRAMMING Source Information Form...

  • Page 52: Zone Information Form

    INSTALLER PROGRAMMING Zone Information Form...

  • Page 53: Macro Editor Form

    INSTALLER PROGRAMMING Macro Editor Form...

  • Page 54: Installation Menu

    INSTALLER INSTALLATION MENU There are three item types in the installation menu: Menu Item – Acts as a folder that holds procedures and/or feature parameters. Procedure – A sequence of feature parameters to perform a guided operation, such as configuring an UNO key. Once you begin a procedure, the system will prompt for the needed information to complete the task.

  • Page 55: Source Setup

    The following items make up the Installation Menu: SOURCE SETUP (SrcSu) POWER MGT (PwMgt) LEARN IR (LrnIR) SYSTEM INFO (SInfo) SOURCE SETUP (SrcSu) Source Setup allows the system’s sources to be configured. The following items can be found in the SOURCE SETUP menu: BASIC SETUP (BasSu) KEY CONFIG (KeyCf) SRC VOL TRIM (SrcVT)
  • Page 56 INSTALLER INSTALLATION MENU Basic Setup (cont’d.) ii. TEMPLATE TYP – (TType) b. Selected: Unassigned (Unasg) c. All Other Selections: 4. DEVICE CODE – (DevCd) 5. TEST IR? – (TstIR) 6. SUCCESS? – (OK?) 7. USE NUM IR? – (NumIR) 8. HIGHEST NUM – (High#) 9.
  • Page 57 Key Config (cont’d.) 2. SOURCE NUM – (Src #) 3. SELECT A KEY – (SelKy) 4. KEY TYPE – (KeyTp) 5. KEY NAME – (KeyNm) 6. COMMAND TYPE – (CmdTp) a. Selected: Learned IR – (LrnIR) i. LEARNED SRC – (LnSrc) b.
  • Page 58 INSTALLER INSTALLATION MENU SOURCE NAMES (SrcNm) This procedure allows the installer to customize the source names for the sources attached to the CAV6.6. See Source Setup Menu on Page 55 and Source Names/Vol Trim - Flow Chart on page 69 1.
  • Page 59 Numeric IR (cont’d) a. Selected: Learned IR (LrnIR) i. LEARNED SRC – (LnSrc) b. Selected: Unassigned (Unasg) c. Selected: Default (Deflt) d. Selected: Macro: i. MACRO - (Macro) ii. MACRO ID – (MacID) e. All Other Selections: 7. DEVICE CODE – (DevCd) 8.
  • Page 60 INSTALLER INSTALLATION MENU Numeric IR (cont’d) i. MACRO - (Macro) ii. MACRO ID – (MacID) e. All Other Selections: 11. DEVICE CODE – (DevCd) 12. KEY FUNCTION – (KeyFn) 13. SAVE CHANGES? – (Save?) SRC SEL CMD (SrcSC) This procedure permits a command to be sent to the source component when the source component is initially selected.

  • Page 61: Zone Setup

    Source Select Command (cont’d) e. All Other Selections: 3. DEVICE CODE – (DevCd) 4. KEY FUNCTION – (KeyFn) 5. SAVE CHANGES? – (Save?) # OF SOURCES (#Srcs) At this field it is necessary to enter the number of sources used in the CAV6.6 system (1 to 6). This limits the sources displayed on the keypad in the normal running mode when the source button is pressed, but also limits source selections in the configuration menus.

  • Page 62: Controller Setup

    INSTALLER INSTALLATION MENU Zone Setup (cont’d) 5. PAGE ENABLE - (PagEn) 6. PAGE VOLUME - (PagVl) CTRLR SETUP (CtlId) Controller Setup is the basic configuration of the controller. This setup menu selects the options for Controller ID and Factory Initialization. See Installation Menu on Page 55 and Controller Setup - Flow Chart on page 73 1.

  • Page 63: Power Management

    Power Management (cont’d) one minute after that. This timeout is postponed for as long as the home theater trigger input has 12VDC present. See Installation Menu on Page 55 and Power Management - Flow Chart on page 74 1. SOURCE NUM – (Src #) 2.

  • Page 64: Learn Ir

    INSTALLER INSTALLATION MENU Power Management (cont’d) 7. POWER OFF CMD – (OfCmd) 8. COMMAND TYPE – (CmdTp) a. Selected: Learned IR (LrnIR) i. LEARNED SRC – (LnSrc) b. Selected: Unassigned (Unasg) c. Selected: Default (Deflt) d. Selected: Macro: i. MACRO – (Macro) ii.

  • Page 65: Learn Ir

    Learn IR (cont’d) 1. LEARNED SRC – (LnSrc) 2. KEY FUNCTION – (KeyFn) 3. LEARN/DELETE – (Ln/Dl) 4. TEST IR? – (TstIR) 5. SUCCESS? - (OK?) MACRO EDITOR (MacEd) This procedure is used to create a sequence of commands that are launched with one key touch or other event.

  • Page 66: Installation Menu

    INSTALLER INSTALLATION MENU Macro Editor (cont’d) i. LEARNED SRC – (LnSrc) b. Selected: Unassigned (Unasg) c. Selected: Default (Deflt) d. Selected: Macro: i. MACRO - (Macro) ii. MACRO ID – (MacID) e. Selected: Delay (Delay) f. All Other Selections: 5. DEVICE CODE – (DevCd) 6.

  • Page 67: Setup Menu Flow Charts

    INSTALLER SETUP MENU FLOW CHARTS Source Setup: Basic Setup...
  • Page 68 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Key Configuration...
  • Page 69 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Source Names/Volume Trim...
  • Page 70 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Numeric IR...
  • Page 71 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Source Select Command/# of Sources...
  • Page 72 INSTALLER SETUP MENU FLOW CHARTS Zone Setup...
  • Page 73 INSTALLER SETUP MENU FLOW CHARTS Controller Setup...
  • Page 74 INSTALLER SETUP MENU FLOW CHARTS Power Management...
  • Page 75 INSTALLER SETUP MENU FLOW CHARTS Learn IR...
  • Page 76 INSTALLER SETUP MENU FLOW CHARTS Macro Editor...

  • Page 77: Setup Menu Flow Charts

    INSTALLER SETUP MENU FLOW CHARTS System Info...

  • Page 78: Reference Section

    IR Keycodes List of key functions identifies what IR codes are supported for each command type (source) by the built-in library. Technical Specifications Product specifications for CAV6.6 controller and UNO-S2 keypad. Warranty Russound product warranty terms and conditions. REFERENCE SECTION...
  • Page 79 Device Codes for TVs: 0030, 0019 Admiral 0093, 0463 Advent 0761 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 America Action 0180 Ampro 0751 Anam 0180 Apex Digital 0748, 0765, 0767 Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell &...
  • Page 80 IR CODES Philips 1818, 1061 Pioneer 1010 Princeton 0113, 0295 Samsung 1190, 1204 Sensory Science 1126 Sharp 1010 Sony 0850 Device Codes for SAT/DSS: AlphaStar 0772 Chaparral 0216 Crossdigital 1109 Echostar 0775, 1005 Expressvu 0775 0566 0775 General Instrument 0869 0775 Hitachi 0819...
  • Page 81 0240 Gewa 0095 Holmes 1215 Hunter Douglas 0433 Lightolier 0184, 1204, 1205, 1206 LiteTouch 0084 Lutron 0597, 0318, 1239, 1597 One For All 0167 RadioShack 0240 Russound 1232, 1233 Sanyo 0336 Security System 0167 Somfy 0780 Universal X10 0167 0167...

  • Page 82: Source Names

    SOURCE NAMES UNO-S1 UNO-S2 Aux 1 AUX 1 Aux 2 AUX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD Player CD 1...
  • Page 83 UNO-S1 UNO-S2 RepTV ReplayTV Rock Rock Satellite Sat 1 Satellite 1 Sat 2 Satellite 2 Sat 3 Satellite 3 SatRd Sat Radio Src 1 Source 1 Src 2 Source 2 Src 3 Source 3 Src 4 Source 4 Src 5 Source 5 Src 6 Source 6...

  • Page 84: Sample System Configurations

    SAMPLE SYSTEM CONFIGURATION 1 Six Zones and Six Sources The configuration shows how the CAV6.6 distrib- utes audio/video throughout the house using six UNO System Keypads and six audio/video source components. Source Components The configuration allows for any zone to select any one of the six source inputs.

  • Page 85: Six Zones And Six Sources

    SAMPLE SYSTEM CONFIGURATION 1 Six Zones and Six Sources...

  • Page 86: Integrate Multiple Cav6.6'S

    SAMPLE SYSTEM CONFIGURATION 2 Integrate Multiple CAV6.6’s This configuration uses an additional CAV6.6 to add six additional amplified zones, controlled through UNO-S2 Keypads. The source compo- nents are connected to both CAV6.6s with RCA cables using the source in/loop out to intercon- nect the audio/video signals.

  • Page 87: Integrate Multiple Cav6.6'S

    SAMPLE SYSTEM CONFIGURATION 2 Integrate Multiple CAV6.6’s...

  • Page 88: Zone Keypad Expansion

    Mount the SA-ZX3 Keypad Splitter hub near the controller using screws or hook and loop fasten- er. The SA-ZX3 requires a 12VDC 1A power sup- ply, such as the Russound 1201A Power Supply.
  • Page 89 SAMPLE SYSTEM CONFIGURATION 3 Zone Keypad Expansion...

  • Page 90: A-Bus Ready Sub-Zone Addition

    CAV6.6 A-BUS Ready Sub-Zone port provides two additional A-BUS Sub-Zones. The A-H2 requires a 24VDC 2.5A Power Supply such as the Russound A-PS power supply. Mount the A-H2 near the CAV6.6 and source equipment using screws or hook and loop fastener.
  • Page 91 SAMPLE SYSTEM CONFIGURATION 4 A-BUS Ready Sub-Zone Addition...

  • Page 92: Additional Amplification

    SAMPLE SYSTEM CONFIGURATION 5 Additional Amplification Additional amplification can be added to the CAV6.6 when more power or more speakers are desired. This configuration adds an external amplifier to the CAV6.6. The Zone Audio (To Amp) Outputs are variably controlled by the associated UNO- S2 keypad and can be connected to an external amplifier.

  • Page 93: Additional Amplification

    SAMPLE SYSTEM CONFIGURATION 5 Additional Amplification...

  • Page 94: Home Theater

    SAMPLE SYSTEM CONFIGURATION 6 Home Theater Home Theater systems can share sources with a CAV6.6 Controller to provide additional listen- ing and viewing options. In this configuration, the Home Theater Receiver provides a 12VDC signal to the CAV6.6 at the Home Theater 12VDC In Port.
  • Page 95 SAMPLE SYSTEM CONFIGURATION 6 Home Theater...

  • Page 96: Ir Key Code List

    INSTALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR Learned Only A / B TV/DVD TVDVD Learned Only TV/LD...
  • Page 97 KEY FUNCTION UNO-S1 TV (HDTV) Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up DiskU...
  • Page 98 INSTALLER KEY CODES CABLE KEY FUNCTION UNO-S1 CABLE Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR A / B TV/DVD TVDVD TV/LD TV LD Input...
  • Page 99 KEY FUNCTION UNO-S1 CABLE Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up DiskU...
  • Page 100 INSTALLER KEY CODES VIDEO ACC KEY FUNCTION UNO-S1 VIDEO ACC Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR A / B TV/DVD TVDVD TV/LD...
  • Page 101 KEY FUNCTION UNO-S1 VIDEO ACC Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up...
  • Page 102 INSTALLER KEY CODES SAT/DSS KEY FUNCTION UNO-S1 SAT/DSS Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR Learned Only A / B TV/DVD TVDVD Learned Only TV/LD...
  • Page 103 KEY FUNCTION UNO-S1 SAT/DSS Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up DiskU...
  • Page 104 INSTALLER KEY CODES KEY FUNCTION UNO-S1 VCR Volume Up VolUp Volume Down VolDn Mute Mutte Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR Learned Only A / B TV/DVD TVDVD Learned Only TV/LD TV LD...

  • Page 105: Key Codes

    KEY FUNCTION UNO-S1 VCR Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up DiskU...
  • Page 106 INSTALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR Learned Only A / B TV/DVD TVDVD Learned Only TV/LD...
  • Page 107 KEY FUNCTION UNO-S1 LASER DISC Bright Brght Close Close Open Open Halt Halt AM/FM AM/FM Disk Up DiskU Disk Down DiskD Info Info External Src ExtSr Live/Intro Intro Menu Menu Back Back Fav Channel FavCh Display Fmt DFrmt Slow Slow PIP On PIPOn PIP Off...
  • Page 108 INSTALLER KEY CODES KEY FUNCTION UNO-S1 DVD Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR Learned Only A / B TV/DVD TVDVD Learned Only TV/LD TV LD...
  • Page 109 KEY FUNCTION UNO-S1 DVD Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up DiskU...
  • Page 110 INSTALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR A / B TV/DVD TVDVD TV/LD TV LD Input...
  • Page 111 KEY FUNCTION UNO-S1 RECEIVER Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up DiskU...
  • Page 112 INSTALLER KEY CODES AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR Learned Only A / B TV/DVD TVDVD Learned Only TV/LD...
  • Page 113 KEY FUNCTION UNO-S1 AMP/MISC AUDIO Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up...
  • Page 114 INSTALLER KEY CODES KEY FUNCTION UNO-S1 CD Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR Learned Only A / B TV/DVD TVDVD Learned Only TV/LD TV LD...
  • Page 115 KEY FUNCTION UNO-S1 Bright Brght Close Close Open Open Halt Halt AM/FM AM/FM Disk Up DiskU Disk Down DiskD Info Info External Src ExtSr Live/Intro Intro Menu Menu Back Back Fav Channel FavCh Display Fmt DFrmt Slow Slow PIP On PIPOn PIP Off PIPOf...
  • Page 116 INSTALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL Volume Up VolUp Volume Down VolDn Mute Mute Channel Up Ch Up Channel Dn Ch Dn Power Power Enter Enter Prev Channel PrvCh TV/Video TVVid TV/VCR TVVCR A / B TV/DVD TVDVD TV/LD...
  • Page 117 KEY FUNCTION UNO-S1 HOME CONTROL Off, Power On/Off Learned Only Learned Only Learned Only Learned Only Learned Only Learned Only Bright Brght Learned Only Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Learned Only Disk Up...

  • Page 118: Technical Specification

    TECHNICAL SPECIFICATION CAV6.6 Controller/Amplifier Power Supply: Frequency Response: Watts per channel: Total Harmonic Distortion: Signal to Noise Ratio: A/V Source Inputs: A/V Source Outputs: A-BUS Ready Ports: Source Audio Input: Source Audio Loop Output: Source Video Input: Source Video Loop Output: Zone Video Output: Zone Variable Line Audio Output: Trigger Outputs:...

  • Page 119: Warranty

    In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of service required. Be sure to pack the unit in a corrugated container with at least three (3) inches of resilient material to protect the unit from damage in transit.
  • Page 120 Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 11/12/04 Rev. 3 28-1143 e-mail: tech@russound.com Copyright © 2004 Russound ® . All rights reserved. www.russound.com...

Table of Contents

Save PDF