Alarm.Com ADC-T2000 Quick Installation Manual

Connect the Thermostat
11
to the system
Now you can connect the Alarm.com Smart
Thermostat to the Alarm.com home system
using the Z-Wave network.
To pair, make sure the thermostat is in
OFF mode (no mode icons are lit) and press
and hold the DOWN ( ) button until you
see the RADIO ( ) icon.
Configure your system
12
You must program the thermostat settings
(or run through the online setup wizard)
before putting the thermostat into heating or
cooling mode.
Visit the Alarm.com Dealer Website or use
MobileTech to configure the system parameters.
Dealer Website > Customers > Equipment >
emPower Devices > Configure Device
For more detailed instructions, please visit:
Dealer Website > Support & Sales >
Support Documentation
For questions, please contact
Support@alarm.com.
Configure Your Thermostat
Using MobileTech
Use MobileTech to quickly configure your
new Smart Thermostat.
Pull up your customer's account
1
and select the emPower® button.
Click on Z-Wave Devices and
2
select the Smart Thermostat.
Review and update Installer
3
settings to configure.
Download MobileTech today!
www.alarm.com/mobiletech
www.alarm.com • 1-877-389-4033
Copyright © 2015 Alarm.com. All rights reserved. Alarm.com and the
Alarm.com Logo are registered trademarks of Alarm.com.
Smart Thermostat
ADC-T2000
Quick
Installation
Guide
www.alarm.com • 1-877-389-4033