ATC Lifestyle Quick Start Manual

ATC LIFESTYLE QUICK START GUIDE
For a full description of the operation of your Lifestyle
heater please refer to the main manual.
Controls
Lock icon
Current Temp/
set point
OK Button
Down
Button
Comfort Mode
Eco Mode Frost Protection Mode
Easy Mode
Easy mode is designed to allow you to use the heater with
just temperature control and ON/OFF.
The heater can be set between 12
and 30
To access the easy mode, touch and
hold the OK and MODE button
together until you have the screen
shown on the left. (Note: the numbers
may be different.).
Touch OK to move to "Param.2" and then touch the up
button to change 1P to 2P and touch OK. To exit easy mode
enter the same menu and change 2P to 1P and touch OK.
The screen will change to show the
current room temperature. You can
now set the temperature required with
the
on and off with the ON/OFF button.
None of the other keys or functions are
available.
Setting the time
In normal operation mode touch
the MODE button and the screen
will change to show the Modes
Menu. Touch the
CONFIG is highlighted and touch
OK,
Time/Day
Heating Indicator
Current Mode Icon
Manual Mode Button
ON/OFF Button
Up
Button
Mode Button
o o
C in 0.5 C steps.
and keys and turn the heater
button until
the same way. Once you touch OK after the minutes
are set the radiator will return to the Config menu by
touching MODE. Touch MODE again to return to the
current operating method.
For all other functions in the CONFIG. menu, please
refer to the main operations manual.

Operating Modes

To choose which way the radiator will
run touch the MODE button to show
the MODES menu. Each of the 4
modes will change the way the heater
works. Use the
select a continuous mode and touch
OK.
o
C
Comfort Mode
Comfort mode is used for continuous heat between 12 and
o
30 C. It is typically used when you are at home and want to
bring the heater on without setting a program or using
manual mode. Temperatures can be adjusted directly using
the and
Eco –Economy Mode
Economy mode temperature is able to be set between 0.5
o
and 4.5 C less than the comfort temperature. Temperature
settings can be adjusted directly using the
Economy is used in program mode and situations where
you don't need full heat (comfort mode) but require a
lower level of heat to prevent the temperature falling
excessively. Note: temperature adjustments made in the
Comfort mode will change the Eco mode setting also
however the 0.5 to 4.5
Anti-Frost Mode
Anti-Frost is factory set at 7
Program Mode as an off set point within a program, it
is also used for long periods of absence when you
want to avoid freezing in the heated zone.
ATC House,
Broomhill Drive.
Tallaght
D24 EF99
Ireland
Touch to select SET HOUR/DAY
and then touch OK.
You can now enter the current
day of the week with the
keys. Select the correct day
and touch OK. The hours, and
then the minutes can now be set
and keys to
keys.
o
C difference will not change.
o
C and is used in the
IRL Tel: +353 (0)1 4625111
UK Tel: +44 (0)203 5649164
Email: Sales@ATC.ie
and
and keys.
P.T.O