Blomberg BOTR30200CSS Installation Manual page 21

Installation
5
4. Attach the microwave oven to the top cabinet.
Cabinet Front
Cabinet Bottom Shelf
Microwave Oven Top
5. Insert 2 self-aligning screws through outer top
cabinet holes. Turn two full turns on each screw.
5
6. Tighten center screw completely.
Over The Range Convection Microwave Oven / Installation Manual
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
6
7. Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall
and the top cabinet.)
8. Install grease filters. See the Owner's Manual
packed with the microwave.
A6. Adjust the exhaust adaptor
Open the top cabinet and adjust the exhaust
adaptor to connect to the house duct.
Damper
Blower Plate
Back of
Microwave
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as Needed
21 / 63 EN