Vaporesso Target Pro Quick Manual

Thank you for choosing Vaporesso Products!
Target Pro is the most innovative vaping product,
featured in its unique shape for a great fit in the hand,
and a trigger-style vape button that is easy to use for
both left-handed and right-handed users. It also brings
a revolutionary atomizing technology: CCELL coils,
which are made out of a porous material that ensure
not only better flavor but also no splashing, no dry hits
and guarantee a longer life cycle. this device has a
superb design, comes with temperature control and
variable wattage functions, and can power up to 75w
using a single 18650 battery. It's magnetic battery
cover is very user-friendly. This fine kit will bring you a
sensational vaping experience.
Please read this manual carefully to ensure proper use.
For additional information or questions regarding to this
product or its use, please visit www.vaporesso.com
Characteristic:
Target Pro
Target Pro Box Mod Output 75W
supports VT: 0.05Ω-1.0Ω VW:0.15Ω-3Ω
4 Adjusting modes: Variable Temperature:Ni/SS/Ti/TCR
Quick Guide
Variable Wattage, Stainless Steel, Titanium
TCR Mode Available at Firmware Update
Automatic Atomizer Recognition
Aqueous Ceramic Coated Surface
Target Pro Box Operation Guide
1. Switch on/off:
power button 5 speedy times to switch on the mod,
"Vaporesso" will appear on the screen.
2. Screen Display:
voltage, resistance value, battery level, temperature,
output wattage; the display will shut off if unused for
15s, the screen will be relit by pressing the fire button.
3. Automatic atomizer recognition:
the coil's resistance as soon as the connection is
detected. It will also recognize coil type, when a
kanthal coil is used, the mod will shift from TC to
wattage mode automatically.
4. To vape:
will initiate 10s' counting down to limit maximum time
for one puff; pressing longer than 10s will shut it down,
"over 10s" will be shown on the screen.
5. Adjust wattage:
wattage at 0.1 increment, long-press will adjust at an
accelerated rate.
6. To rotate the screen display:
3 times.
7. To lock the diameters:
Target Pro Package include
1 Complete Target Pro Tank
(CCELL SS 0.5Ω pre-installed)
1 Target Pro Box
1 Extra CCELL SS 0.6Ω
1 USB cable
1 User Manual
Specification
Target Pro Tank
Diameter: 22mm
Length: 53.5mm
Weight: 60g
Capacity: 2.5ml
while press the power button simultaneously, "
SYSTEM LOCKED" appears on the screen. Repeat
after a battery is installed, press the
the motion to unlock.
8. Charging:
the battery, OLED display current battery level (0%,
after switch on, OLED displays
20%, 50%, 80%, and 100%), The display will remain lit
while charging.
Temperature Control
the mod will read
1. Switch 4 modes:
between wattage mode and different temperature
control modes.
2.Adjust temperature:
press the " + " " - " to adjust the temperature at 10℉
Long pressing the power button to vape, it
or 5℃, long-press will adjust at an accelerated rate.
3.Lock/Unlock resistance:
press the " -"and power button simultaneously for 2s
will lock/unlock the resistance level, "
Press the " + " " - " to adjust the
on the display. Attach a new atomizer will not change
the locked resistance.
4.Automatic atomizer recognition:
fast click fire button
temperature control effect, the mod will ask the user if
the new atomizer is attached. " OLD LOAD-, NEW
Press the " + " steadily
Target Pro Box
Dimension: 92x48x27 mm
Weight: 180g
Temperature Range: 100℃-315℃/200F-600F
Output Wattage: 5w to 75w
Suitable atomizer:
Output Modes:VT/Ni/SS/Ti/TCR
Standby Current:
Voltage range: 0-9V
Battery Cell: Lithium 18650
Casting: Zinc Alloy and stainless steel
Thread: 510 thread
Display: OLED
USB Updatable and customizable firmware
Drip tip
Tip connector
Pyrex glass tube
CCELL atomizer
Air flow base
LOAD + " will appear on the display. If a new atomizer
is attached, press " + ", the mod will read new
resistance; if not, press " - ", the mod will read at locked
resistance.
Plug in the Micro USB cable to charge
5.Firmware update and customizing:
can be updated and customized through a simple
software that can be downloaded directly from our
website. The software will be made to run on Windows
systems and will be available in Chinese or English. It
Press " + " " - "together to switch will also include a "help" sections for urgent questions.
The directions on how to use our software will be
found on our webiste and Facebook page.
At temperature control mode,
Target Pro Box Protection functions
Over - temperature protection
(PCBA temperature less than 65℃)
At temperature control,
Low battery protection
Short-circuit protection
" will appear
Low resistance protection (Resistance ≧0.13Ω)
Reverse connection of the battery power terminal
Over-charge protection and over discharge
To achieve better
protection (2.9v-4.3v)
No atomizer detection protection
Over current protection
Filling E-juice
1. To refill the E-juice from the top, simply twist open
the lid.
2. Once filled, twist back shut and resume use.
VT: 0.05Ω-1.0Ω VW: 0.15Ω-3Ω
﹤
50uA Changing the atomizer
1. Remove the tank from the battery and turn the tank
upside down;
2. Unscrew the air flow base and carefully set your
tank aside;
3. Unscrew the atomizer unit counterclockwise;
4. Once removed, discard the used one. Screw the
new atomizer unit clockwise into the air flow base;
Power button
5. Screw the air flow base back to the tank body.
Warning:
OLED display
When using a new atomizer, after filling E-juice,
let the tank stand for 2 minutes, so the ceramic
Magnetic cover
can be saturated with juice before firing;
+
Refill the tank before the tank become completely
empty in order to avoid dry burning or damage to
-
the atomizer.
Micro USB
Caution
1. The Target Pro is intended for usage by people
over 18, NOT by non-smokers, children, pregnant or
breastfeeding women, people with or at risk of heart
disease, or people taking medication for depression
The firmware or asthma. The electronic cigarette is not a smoking
cessation device.
2. Please keep this unit out of reach of children or
pets.
3. Please don't drop, throw or abuse your Target Pro ,
it may cause damage.
4. Please keep the battery dry.
5. Do not place it in extremely temperatures.
6. Do not try to disassemble the battery.
7. This device does not mean to be used as a nicotine
replacement therapy for smoking cessation.