Vaporesso XROS MINI - Pod Kit Manual

Also See for XROS MINI:

User manual (56 pages)

Table of Contents

Contents

1 SPECIFICATIONS
2 EXPLODED VIEW
3 PACKING LIST
4 USE INSTRUCTIONS
5 PROTECTIONS
6 CAUTIONS
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

Vaporesso XROS MINI - Pod Kit Manual

SPECIFICATIONS

Dimensions: 98.9 x 23.4 x 13.5mm
POD Capacity: 2ml
POD Resistance: 1.2Ω or 0.8Ω
Battery Capacity: 1000mAh
Charging Current: DC 5V/1A, Type-C
Display: Single 3-Color LED Indicator

EXPLODED VIEW

PACKING LIST

1.2ΩVersion
1 x VAPORESSO XROS MINI Battery
1 x VAPORESSO XROS Series 1.2Ω POD (2ml)
1 x Type-C USB Cable
1 x User Manual
1 x Warranty Card

0.8ΩVersion
1 x VAPORESSO XROS MINI Battery
1 x VAPORESSO XROS Series 0.8Ω MESH POD (2ml)
1 x Type-C USB Cable
1 x User Manual
1 x Warranty Card

USE INSTRUCTIONS

Replace the POD

Pull out the used POD from the device;
Put the new POD into the device firmly.

Fill the E-liquid

Filling the E-liquid

Snap off the drip tip from the POD;
Gently insert the e-liquid filling bottle tip into the filling slot;
Press down and squeeze the e-liquid through the slot;
Install the drip tip back and confirm it's shut firmly;
Please wait 5 minutes for the e-liquid to soak into the coil completely.

Start Vaping

Inhale directly to enjoy extraordinary vaping experience.

Battery Level

LED Color	Battery Status
	High (70%-100%)
	Medium (30%-70%)
	Low (0%-30%)

Charge the Battery

After connecting the Type-C cable to the device, the LED indicator will breathe in red light. Once the battery is fully charged, the indicator will turn into green light.

PROTECTIONS

Protections	Situation	Indicator
Low Resistance Protection	The device detects an ultra-low resistance.	x 5 Stop Output
Short-circuit Protection	The device detects a short circuit.	x 5 Stop Output
No Load Protection	The device does not detect an atomizer.	x 5 Stop Output
High Resistance Protection	The device detect an ultra-high resistance.	x 5 Stop Output
Low Voltage Protection	The battery voltage drops too low.	x 3 Stop Output
Over Charge Protection	The device is fully charged.	Stop Charging
Over Discharge Protection	The battery voltage drops too low during vaping.	x 3 Stop Output
Auto-Shut off Protection	Constantly vape for 8 seconds or more.	x 3 Stop Output

CAUTIONS

Please turn off the device when it is not in use.
Do not leave the charging device unattended.
Do not drop, throw or abuse your device, which may cause damage.
Please use a standard USB output charger with proper charging current and voltage range.
Keep away from the water or any flammable gas, liquid.
Do not expose the device to direct sunlight, dust, moisture or mechanical shock.
Do not expose the device to extreme temperature. (Recommended temperature range: -10~60℃ /14~140 ℉ while using and -10~45℃ /14~113 ℉ while storing).
EEE Recycling: the product should not be treated as household waste, instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Battery Recycling: the product battery should not be treated as household waste, instead, it should be handed over to the applicable used battery collection point for recycling.
Only have your device repaired by Vaporesso. Do not attempt to repair it by yourself as damage or personal injury may occur.

If there is any additional requirement about this product, please consult the local agent or contact us through our website: www.vaporesso.com