Yamaha AVENTAGE RX-A3080 Owner's Manual page 17

PHONO jacks
a
For connecting to a turntable (p.47).
Wireless antenna
b
For a wireless (Wi-Fi) connection to a network (p.67) and a Bluetooth connection (p.96).
AUDIO 1-3 jacks
c
For connecting to audio playback devices and inputting audio signals (p.47).
AUDIO 4 (XLR) jacks (RX-A3080 only)
For connecting to an audio playback device and inputting audio signals (p.47).
AV 1-4 jacks
d
For connecting to video/audio playback devices and inputting video/audio signals (p.45).
HDMI OUT 1-2 jacks
e
For connecting to an HDMI-compatible TV and outputting video/audio signals (p.42). When using ARC, TV
audio signal can also be input through the HDMI OUT 1 jack.
COMPONENT VIDEO (AV 1-2) jacks
f
For connecting to video playback devices that support component video and inputting video signals
(p.46).
HDMI (AV 1-7) jacks
g
For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.45).
TRIGGER OUT 1-2 jacks
h
For connecting to devices that support the trigger function (p.52).
REMOTE IN/OUT jacks
i
For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other
devices from another room (p.113).
HDMI OUT 3 (ZONE OUT) jack
j
For connecting to an HDMI-compatible device used in Zone2 or Zone4 (p.112).
k NETWORK jack
For connecting to a network with a network cable (p.51).
RS-232C terminal
l
This is a control expansion terminal for custom installation. Consult your dealer for details.
VOLTAGE SELECTOR
m
(Taiwan, Brazil and Central and South America models only)
Selects the switch position according to your local voltage (p.52).
AC IN jack
n
For connecting the supplied power cable (p.52).
ANTENNA jacks
o
For connecting to radio antennas (p.49).
ZONE OUT/PRE OUT jacks (RX-A3080)
p
For connecting to an external amplifier used in Zone2 or Zone3 and outputting audio (p.111), or for
connecting to an external power amplifier for front presence or rear presence channels (p.40).
ZONE OUT jacks (RX-A2080)
For connecting to an external amplifier used in Zone2 or Zone3 and outputting audio (p.111).
SPEAKERS terminals
q
For connecting to speakers (p.20).
PRE OUT jacks, PRE OUT (XLR) jacks (RX-A3080 only)
r
For connecting to a subwoofer with built-in amplifier (p.28) or to an external power amplifier (p.40).
17
En