Yamaha AVENTAGE RX-A3080 Owner's Manual page 120

Item
Enables/disables the video signal processing settings
Video Mode
(V.M) configured in the "Setup" menu.
Video Processing
Video
(Video Process.)
Adjustment Selects a video adjustment setting from presets.
(Video Adjust)
Video Out Video Out Selects a video to be output with the selected audio
(Video Out) (V. Out) source.
Shuffle
Configure the shuffle setting for playback.
(Shuffle)
Shuffle / Repeat
(Shuffle/Repeat)
Repeat
Configure the repeat setting for playback.
(Repeat)
FM Mode FM Mode
Switches between the reception settings for FM radio.
(FM Mode) (Mode)
FM Auto Preset Automatically registers FM radio stations with strong
(FM Auto Preset) signals as presets.
Preset Clear Preset
Clears radio stations registered to preset numbers.
(Preset) (Clear Preset)
Clears all the radio stations registered to preset
Clear All Preset
(ClearAllPreset) numbers.
Add to favorites Adds your favorite Internet radio station to
(Add to Fav.) the"Favorites" folder.
Remove from favorites
Removes it from the "Favorites" folder.
(RemovefromFav.)
(Australia, U.K., Europe, Middle East and Russia models
Init Scan
only)
(Init Scan)
Performs an initial scan for DAB radio reception.
(Australia, U.K., Europe, Middle East and Russia models
Tune AID
only)
(Tune AID)
Checks reception strength of each DAB channel label.
On-screen Information
Displays the current status information.
(On-screen Info)
Function Page
123
123
123
-
-
124
124
124
124
124
124
87
90
124
120
En
■ Tone Control (Tone Control)
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to 0.0 dB to +6.0 dB, 0.5 dB increments
Y
• When both "Treble" and "Bass" are 0.0 dB, "Bypass" appears.
• If you set an extreme value, sounds may not match those from other channels.
■ YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
YPAO Volume (YPAO Vol.)
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-frequency
levels are automatically adjusted according to the volume so that you can enjoy natural
sounds even at low volume.
Settings
Off (Off) Disables YPAO Volume.
On (On) Enables YPAO Volume.
X
• YPAO Volume works effectively after the measurement results of "YPAO" have been already saved (p.55).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or at
night.