Yamaha AVENTAGE RX-A3080 Owner's Manual page 127

Menu
Information
Lipsync
DSP Parameter
Sound
Surround Decoder
9ch Stereo
Dynamic Range
Volume
Pure Direct Mode
Adaptive DSP Level
Virtual Speaker
Ultra Low Jitter PLL Mode (RX-A3080 only)
DAC Digital Filter (RX-A3080 only)
Balance Input Attenuator (RX-A3080 only)
Item
Displays information about the current audio signal.
Delay Enable Enables/disables the "Lipsync" adjustment configured in "Auto/Manual Select" in the "Setup" menu.
Auto/Manual Select Selects the method to adjust the delay between video and audio output.
Adjustment Adjusts the delay between video and audio output manually.
DSP Level Adjusts the sound field effect level.
Initial Delay Adjusts the delay between the direct sound and presence sound field generation.
Room Size Adjusts the broadening effect of the presence sound field.
Liveness Adjusts the loss of the presence sound field.
Reverb Time Adjusts the decay time of the rear reverberant sound.
Reverb Delay Adjusts the delay between the direct sound and reverberant sound generation.
Reverb Level Adjusts the volume of the reverberant sound.
Surround Initial Delay Adjusts the delay between the direct sound and surround sound field generation.
Surround Room Size Adjusts the broadening effect of the surround sound field.
Surround Liveness Adjusts the loss of the surround sound field.
Surround Back Initial Delay Adjusts the delay between the direct sound and surround back sound field generation.
Surround Back Room Size Adjusts the broadening effect of the surround back sound field.
Surround Back Liveness Adjusts the loss of the surround back sound field.
Decode Type Selects a surround decoder to be used in combination with the selected sound program.
Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played.
Center Image Adjusts the center localization (broadening effect) of the front sound field.
Level Adjusts the entire volume.
Front / Rear Balance Adjusts the front and rear volume balance.
Left / Right Balance Adjusts the left and right volume balance.
Adjusts the height volume balance using the presence speakers.
Height Balance
Monaural Mix Enables/disables monaural sound output.
Reset Restores all default settings.
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Max Volume Sets the limit value of the volume.
Initial Volume Sets the initial volume for when this receiver is turned on.
Selects whether to output video signals during the Pure Direct mode.
Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted.
VPS Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers.
VSBS Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
Enables/disables the jitter elimination function.
Selects the digital filter type of the audio DAC (digital-to-analog converter).
Selects whether to activate the attenuator for the balance input to avoid sound distortion.
Function
127
En
Page
136
136
136
137
137
137
137
137
137
138
138
138
138
138
138
138
139
139
139
139
139
139
139
139
140
140
140
140
140
140
140
141
141
141
141
141