Probe Specifications - GE moisture.iq User Manual

9.9 Probe Specifications

Moisture Image Series Probe (MISP or MISP2)
•
Type: Aluminum oxide moisture sensor probe and electronics module
•
Calibration: Each sensor is individually computer calibrated against known moisture concentrations,
traceable to national standards.
•
Process Temperature: -110 to +70°C (-166 to +158°F) dew/frost point temperature
•
Storage Temperature: 70°C (158°F) maximum
•
Operating Pressure: 5
•
Flow Range
•
Gases: Static to 10,000 cm/sec linear velocity at 1 atm
•
Liquids: Static to 10 cm/sec linear velocity at 1 g/cc
•
Response Time: <5 seconds for 63% step change in moisture content in either wet up or dry down cycle
•
Moisture Image Series Probe/Analyzer Separation: 915 m (3000 ft) with provided cable
Note: Sale of the MISP probe was discontinued by BHGE in 2010 and it was replaced by the MISP2 probe.
Although the MISP probe can be used successfully with the moisture.IQ analyzer, there may be
communication issues when using long cables. Please contact our BHGE technical support team for
assistance.
•
Moisture Image Series Probe/Analyzer Cable: Unshielded, twisted pair, maximum loop resistance of 100
•
Built-in Temperature Sensor (optional):
•
Type: Thermistor network
•
Operating Range: -30 to +70°C (-22 to +158°F)
•
Accuracy: ±0.5°C overall
•
Built-in Pressure Sensor (optional)
•
Type: Solid state/piezoresistive
•
Available Ranges: 30 to 300 psig, 50 to 500 psig, 100 to 1000 psig, 300 to 3000 psig, 500 to 5000 psig
•
Accuracy: ±1% of span
moisture.IQ User's Manual
μ
of Hg to 5000 psig
Chapter 9. Specifications
Ω
105