Uninterruptible Power Supply Unit Ups6; Installation Of The Primary-Switched Power Supply Unit; View Of Ups6; Structure - Transas NAVI-SAILOR 4100 ECDIS Installation Manual

Uninterruptible Power Supply Unit UPS6

UPS6 installation consists of installation following units:
•
EMC Filter ME-MAX/NEF/QUINT20A;
•
Primary-Switched Power Supply Unit QUINT-PS/1AC/24DC/20;
•
Uninterruptible Power Supply Unit for Universal Use QUINT-DC-UPS/24DC/20;
•
Battery Module 24 V DC, 3.4 Ah QUINT-BAT/24DC/3.4AH (7.2 or 12 AH).
Technical specification of UPS6 is given in
For connection of the units see also connection diagram enclosed in

Installation of the Primary-Switched Power Supply Unit

QUINT-PS/1AC/24DC/20
Table 3. Structure
No. Comments
1 AC input: 85...264 V AC input voltage, 45...65 Hz frequency
2 DC output: 24 V DC output voltage (default), can be set between 18 and 29.5 V DC
3 Active POWER BOOST switching output
4 DC OK output active
5 DC OK output floating
6 Potentiometer (covered) 18V DC...29.5 V DC
7 “DC OK” LED
8 “BOOST” LED
9 Universal DIN rail adapter UTA 107/30
Fig. 8. View of UPS6
Chapter 3
.
Fig. 9. Structure
Workstations Installation
Annex G
.
Chapter 1. Hardware Installation 23