Summary of Contents for Ruckus Wireless zoneflex r300
Page 1
ZoneFlex Access Point Simple Network Management Protocol Release 100.0 Reference Guide Includes commands for ZoneFlex access points and wireless bridges Part Number 800-70860-001 Rev A Published March 2016 www.ruckuswireless.com...
Dynamic PSK, FlexMaster, MediaFlex, MetroFlex, Simply Better Wireless, SmartCast, SmartMesh, SmartSec, Speed- Flex, ZoneDirector, ZoneSwitch, and ZonePlanner are trademarks of Ruckus Wireless, Inc. in the United States and other countries. All other product or company names may be trademarks of their respective owners.
Most user guides and release notes are available in Adobe Acrobat Reader Portable Document Format (PDF) or HTML on the Ruckus Wireless Support Web site at https://support.ruckuswireless.com/documents.
About This Guide Access Point MIB Changes in 100.0 Access Point MIB Changes in 100.0 ZoneFlex Release 100.0 contains the following additions/changes to access point MIBs compared to the previous release: Events • ruckusEventAPFactoryTrap • ruckusEventFailApplconfTrap • ruckusEventFailDownTrap • ruckusEventIPChangeTrap •...
Access Point Event MIBs In this chapter: • Access Point Event MIB Group • Ruckus AP Event Objects This section describes ZoneFlex AP events and traps that are triggered when an event occurs, along with possible causes for the event and recommended actions to take (if any).
Access Point Event MIBs Access Point Event MIB Group Access Point Event MIB Group The ruckusZDEventTraps MIB tree contains events that trigger SNMP traps to be delivered to an SNMP receiver. ruckusEventAssocTrap MIB Name ruckusEventAssocTrap Events (tbd) Severity minor 1.3.6.1.4.1.25053.2.1.1.1 Status current Objects...
Access Point Event MIBs Access Point Event MIB Group 1.3.6.1.4.1.25053.2.1.1.2 Status current Objects ruckusEventClientMacAddr Description Triggered when there is a client disassociation event. The client's MAC address is enclosed. Recommended actions No action required. ruckusEventSetErrorTrap MIB Name ruckusEventSetErrorTrap Events (tbd) Severity major 1.3.6.1.4.1.25053.2.1.1.3...
Access Point Event MIBs Access Point Event MIB Group Recommended actions No action required. ruckusEventConnectTrap MIB Name ruckusEventConnectTrap Events (tbd) Severity minor 1.3.6.1.4.1.25053.2.2.1.4 Status current Objects ruckusEventClientMacAddr Description Triggered when there is an AP connect event. The AP's MAC address is enclosed. Recommended actions No action required.
Access Point Event MIBs Access Point Event MIB Group 1.3.6.1.4.1.25053.2.1.1.26 Status current Objects ruckusEventClientMacAddr Description Triggered when there is an AP disconnect event. The AP's MAC address is enclosed. Recommended actions No action required. ruckusEventAPFactoryTrap MIB Name ruckusEventAPFactoryTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.30...
Access Point Event MIBs Access Point Event MIB Group ruckusEventFailApplconfTrap MIB Name ruckusEventFailApplconfTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.31 Status current Objects ruckusEventClientMacAddr Description Trigger when the AP has failed to apply configuration. The AP's MAC address is enclosed. Recommended actions No action required.
Access Point Event MIBs Access Point Event MIB Group Status current Objects ruckusEventClientMacAddr Description Trigger when the AP has failed to download configuration.The AP's MAC address is enclosed. Recommended actions No action required. ruckusEventIPChangeTrap MIB Name ruckusEventIPChangeTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.33 Status...
Access Point Event MIBs Access Point Event MIB Group ruckusEventAPTunDownTrap MIB Name ruckusEventAPTunDownTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.34 Status current Objects ruckusEventClientMacAddr Description Trigger when the AP tunnel is down. The AP's MAC address is enclosed. Recommended actions No action required. ruckusEventFailUpgradeTrap MIB Name ruckusEventFailUpgradeTrap...
Access Point Event MIBs Access Point Event MIB Group Status current Objects ruckusEventClientMacAddr Description Trigger when the AP has failed to upgrade. The AP's MAC address is enclosed. Recommended actions No action required. ruckusEventParameterErrTrap MIB Name ruckusEventParameterErrTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.36 Status...
Access Point Event MIBs Access Point Event MIB Group ruckusEventNoRecongTrap MIB Name ruckusEventNoRecongTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.37 Status current Objects ruckusEventClientMacAddr Description Trigger when command is not recognized. The AP's MAC address is enclosed. Recommended actions No action required. ruckusEventFailTakeEffectTrap MIB Name ruckusEventFailTakeEffectTrap...
Access Point Event MIBs Access Point Event MIB Group Status current Objects ruckusEventClientMacAddr Description Trigger when command does not take effect. The AP's MAC address is enclosed. Recommended actions No action required. ruckusEventUpgradeSuccTrap MIB Name ruckusEventUpgradeSuccTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.39 Status current...
Access Point Event MIBs Access Point Event MIB Group ruckusEventDownloadSuccTrap MIB Name ruckusEventDownloadSuccTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.40 Status current Objects ruckusEventClientMacAddr Description Trigger when the AP downloads a configuration file successfully. The AP's MAC address is enclosed. Recommended actions No action required.
Access Point Event MIBs Access Point Event MIB Group Status current Objects ruckusEventClientMacAddr Description Trigger when a configuration file is applied successfully. The AP's MAC address is enclosed. Recommended actions No action required. ruckusEventTunnelUpTrap MIB Name ruckusEventTunnelUpTrap Events (tbd) Severity medium 1.3.6.1.4.1.25053.2.1.1.42 Status...
Access Point Event MIBs Ruckus AP Event Objects Ruckus AP Event Objects The objects in the following section are contained in the ruckusEventObjects tree and are used in traps to specify details for the trap. ruckusEventClientMacAddr MIB Name ruckusEventClientMacAddr 1.3.6.1.4.1.25053.2.1.2.15 Syntax octet string Status...
Access Point Event MIBs Ruckus AP Event Objects Description OID of the error snmp-set. ruckusEventAPSerialNumber MIB Name ruckusEventAPSerialNumber 1.3.6.1.4.1.25053.2.1.2.30 Syntax octet string Status current Max Access accessible-for-notify Description AP's serial number. ruckusEventAPMacAddr MIB Name ruckusEventAPSerialNumber 1.3.6.1.4.1.25053.2.1.2.31 Syntax octet string Status current Max Access accessible-for-notify...
Access Point Event MIBs Ruckus AP Event Objects Description AP's MAC address. ruckusEventContent MIB Name ruckusEventAPSerialNumber 1.3.6.1.4.1.25053.2.1.2.32 Syntax octet string Status current Max Access accessible-for-notify Description Trap contents. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point System MIBs In this chapter: • Imports • Groups • System Info • System Services The objects contained in the RUCKUS-SYSTEM-MIB.txt MIB file are used to set and get Access Point system configuration values including resource utilization (get) and to factory reset the AP (set).
Access Point System MIBs System Info System Info The ruckusSystemInfo MIB tree contains CPU and memory usage information. ruckusSystemCPUUtil SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION CPU utilization. ruckusSystemInfo 1 ruckusSystemMemoryUtil SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION Memory utilization. ruckusSystemInfo 2 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point System MIBs System Info ruckusSystemFlashFreeSize SYNTAX INTEGER UNITS KByte MAX-ACCESS read-only STATUS current DESCRIPTION Flash free size in KBytes. ruckusSystemInfo 3 ruckusSystemCPUModel SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION CPU Model ruckusSystemInfo 4 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point System MIBs System Info ruckusSystemtCPUSpeed SYNTAX Unsigned32 UNITS MAX-ACCESS read-only STATUS current DESCRIPTION CPU Speed ruckusSystemInfo 5 ruckusSystemtFlashModel SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION Flash Model ruckusSystemInfo 6 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point System MIBs System Info ruckusSystemtMemModel SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION Memory Model ruckusSystemInfo 7 ruckusSystemFlashSize SYNTAX Gauge UNITS KBytes MAX-ACCESS read-only STATUS current DESCRIPTION Total flash size in KBytes. ruckusSystemInfo 9 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point System MIBs System Info ruckusSystemMemSize SYNTAX Gauge UNITS KBytes MAX-ACCESS read-only STATUS current DESCRIPTION Total memory size in Bytes ruckusSystemInfo 10 ruckusSystemOSType SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION OS Type ruckusSystemInfo 30 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point System MIBs System Services System Services The ruckusSystemServices MIB tree contains objects used to configure system services such as HTTP, Telnet, SSH, Syslog, etc., and to perform tasks such as reboot the AP, factory reset and renew DHCP. ruckusSystemHTTPStatus SYNTAX TruthValue...
Access Point System MIBs System Services DEFVAL true ruckusSystemSyslog 1 ruckusSystemSyslogServerIP SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-write STATUS current DESCRIPTION IP(v4 or v6) of syslog server. ruckusSystemSyslog 2 ruckusSystemSyslogServerPort SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION Port of syslog server. ruckusSystemSyslog 3 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point System MIBs System Services MAX-ACCESS read-write STATUS current DESCRIPTION Config FlexMaster server URL. URL start with 'http://' or 'https://'" ruckusSystemFlexMaster 1 ruckusSystemReboot SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION Reboot. DEFVAL true ruckusSystemCommands 1 ruckusSystemSetFactory SYNTAX TruthValue MAX-ACCESS read-write ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point System MIBs System Services STATUS current DESCRIPTION Set factory default. DEFVAL true ruckusSystemCommands 2 ruckusSystemDHCPRenew SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION Renew DHCP IP. DEFVAL true ruckusSystemCommands 3 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Page 53
Ruckus Product MIBs Wireless Hotzone Products ledAlternateMode1Mode2Mode6(4): Alternalte between modes 1 and 2 at a 30 second period and then go to mode 6 blueActive(5): Blue Active Surge Protection Indicator, blueActiveCMOnlineLed(6): Blue Active Surge Protection Indicator and Cable Modem online Green LED enabled, ledAllOff(7): All LEDs disabled, heartbeatOffCM(8):...
Page 55
Ruckus Product MIBs Wireless Hotzone Products ruckusZF7761CMPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies password of cable modem. " ::= { ruckusZF7761CMCustomization 5 } ruckusZF7761CMLEDMode OBJECT-TYPE SYNTAX INTEGER { ledAllOff(0), blueActive(1), blueActiveCMOnlineLed(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ledAllOff(0): All LEDs disabled after 3 second delay,...
Page 56
Ruckus Product MIBs Wireless Hotzone Products SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable Access Point heartbeat monitoring." { ruckusZF7761CM 8 } ruckusZF7761CMWanMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the mac address of the Cable Modem WAN interface."...
Access Point WLAN MIBs In this chapter: • Imports • Groups • WLAN Table • WLAN Supported Transmit Rates • WLAN Supported Receive Rates • WLAN Station Statistics-Hardware • WLAN Station Information • WLAN Station MQ Statistics • WLAN Station Statistics-Ruckus •...
Access Point WLAN MIBs WLAN Table WLAN Table The WLAN table provides options for modifying an existing WLAN; WLAN creation is performed via the ruckusWLANRadioTable. ruckusWLANTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WLAN table." ::= { ruckusWLANInfo 1 } ruckusWLANEntry OBJECT-TYPE SYNTAX RuckusWLANEntry MAX-ACCESS not-accessible...
Page 75
Access Point WLAN MIBs WLAN Table ::= { ruckusWLANEntry 1 } ruckusWLANBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is the unique identifier in this BSS. It is the 48-bit MAC address of the wireless interface." ::= { ruckusWLANEntry 2 } ruckusWLANBSSType OBJECT-TYPE SYNTAX INTEGER { station(1),...
Page 76
Access Point WLAN MIBs WLAN Table corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response...
Page 77
Access Point WLAN MIBs WLAN Table "This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames." ::= { ruckusWLANEntry 6 } ruckusWLANRTSThreshold OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current...
Page 78
Access Point WLAN MIBs WLAN Table SYNTAX INTEGER (256..2346) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
Page 79
Access Point WLAN MIBs WLAN Table "Specifies the current operating channel." ::= { ruckusWLANEntry 10 } ruckusWLANWDSEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if the WDS is enabled or disabled on this interface. Allow 4 address mode of operation for an given WLAN interface." DEFVAL { false } ::= { ruckusWLANEntry 11 } ruckusWLANAdminStatus OBJECT-TYPE...
Page 80
Access Point WLAN MIBs WLAN Table "Enabled when 11g and 11b clients exist on the same network. none: Do not use any protection ctsOnly: AP will send a CTS frame prior to sending 11g frames. The CTS frame will silence 11b clients rtsCts: Require RTS to be sent by sender of 11g frame and responder to send CTS prior to any 11g frames being sent."...
Page 81
Access Point WLAN MIBs WLAN Table SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged." ::= { ruckusWLANEntry 16 } ruckusWLANIGMPSnooping OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2)}...
Page 82
Access Point WLAN MIBs WLAN Table MAX-ACCESS read-write STATUS current DESCRIPTION "Subopt-1 with format: 1: IF-Name:VLAN-ID:ESSID:AP-Model:AP-Name:AP-MAC; 2: AP-MAC-hex; 3: AP-MAC-hex ESSID; 4: ESSID." ::= { ruckusWLANEntry 51 } ruckusWLANOption82Subopt2 OBJECT-TYPE SYNTAX INTEGER {Client-MAC-hex(1), Client-MAC-hex_ESSID(2), AP-MAC-hex(3), AP-MAC-hex_ESSID(4), AP-MAC(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Subopt-2 with format: 1: Client-MAC-hex;...
Page 83
Access Point WLAN MIBs WLAN Table DESCRIPTION "Subopt-150 with VLAN-ID." ::= { ruckusWLANEntry 53 } ruckusWLANOption82Subopt151 OBJECT-TYPE SYNTAX INTEGER {Area-Name(1), ESSID(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Subopt-151 with format: 1: Area-Name; 2: ESSID." ::= { ruckusWLANEntry 54 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point WLAN MIBs WLAN Supported Transmit Rates WLAN Supported Transmit Rates ruckusWLANSuppDataRatesTxTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANSuppDataRatesTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Transmit bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject to limitations of each individual PHY."...
Page 85
Access Point WLAN MIBs WLAN Supported Transmit Rates MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index object that identifies which data rate to access." ::= { ruckusWLANSuppDataRatesTxEntry 1 } ruckusWLANSuppDataRatesTxValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Transmit bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s subject to limitations of each individual PHY"...
Access Point WLAN MIBs WLAN Supported Receive Rates WLAN Supported Receive Rates ruckusWLANSuppDataRatesRxTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANSuppDataRatesRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The receive bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s.'"...
Page 87
Access Point WLAN MIBs WLAN Supported Receive Rates STATUS current DESCRIPTION "Index object which identifies which data rate to access." ::= { ruckusWLANSuppDataRatesRxEntry 1 } ruckusWLANSuppDataRatesRxValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The receive bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s."...
Access Point WLAN MIBs WLAN Station Statistics-Hardware WLAN Station Statistics-Hardware ruckusWLANStaStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANStaStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WLAN counter table." ::= { ruckusWLANStaInfo 1 } ruckusWLANStaStatsEntry OBJECT-TYPE SYNTAX RuckusWLANStaStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each wlan counter entry." INDEX { ifIndex, ruckusWLANStaStatsMacAddr }...
Page 90
Access Point WLAN MIBs WLAN Station Statistics-Hardware MAX-ACCESS read-only STATUS current DESCRIPTION "station SSID." ::= { ruckusWLANStaStatsEntry 2 } ruckusWLANStaStatsRxDataFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx data frames." ::= { ruckusWLANStaStatsEntry 3 } ruckusWLANStaStatsRxMgmtFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION...
Page 91
Access Point WLAN MIBs WLAN Station Statistics-Hardware SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx unicast frames." ::= { ruckusWLANStaStatsEntry 6 } ruckusWLANStaStatsRxMulticastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx multicast frames." ::= { ruckusWLANStaStatsEntry 7 } ruckusWLANStaStatsRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current...
Page 92
Access Point WLAN MIBs WLAN Station Statistics-Hardware ruckusWLANStaStatsRxNoPrivacy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx with WEP but privacy off." ::= { ruckusWLANStaStatsEntry 10 } ruckusWLANStaStatsRxWEPFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx WEP processing failed." ::= { ruckusWLANStaStatsEntry 11 } ruckusWLANStaStatsRxDemicFail OBJECT-TYPE SYNTAX Counter32...
Page 93
Access Point WLAN MIBs WLAN Station Statistics-Hardware ruckusWLANStaStatsRxDefrag OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx defragmentation failed." ::= { ruckusWLANStaStatsEntry 14 } ruckusWLANStaStatsTxDataFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx data frames." ::= { ruckusWLANStaStatsEntry 15 } ruckusWLANStaStatsTxMgmtFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only...
Page 94
Access Point WLAN MIBs WLAN Station Statistics-Hardware ::= { ruckusWLANStaStatsEntry 17 } ruckusWLANStaStatsTxMulticastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx multicast frames." ::= { ruckusWLANStaStatsEntry 18 } ruckusWLANStaStatsTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx data count (bytes)." ::= { ruckusWLANStaStatsEntry 19 } ruckusWLANStaStatsTxAssoc OBJECT-TYPE SYNTAX Counter32...
Page 95
Access Point WLAN MIBs WLAN Station Statistics-Hardware "Tx (re)association failures" ::= { ruckusWLANStaStatsEntry 21 } ruckusWLANStaStatsTxAuth OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx (re)authentications." ::= { ruckusWLANStaStatsEntry 22 } ruckusWLANStaStatsTxAuthFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx (re)authentication failures."...
Page 96
Access Point WLAN MIBs WLAN Station Statistics-Hardware DESCRIPTION "Total Tx and Rx data bytes of last 5 min period." ::= { ruckusWLANStaStatsEntry 25 } ruckusWLANStaStatsTxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "Bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Tx data rate of last 5 min period." ::= { ruckusWLANStaStatsEntry 2 } ruckusWLANStaStatsRxRate OBJECT-TYPE SYNTAX Unsigned32...
Access Point WLAN MIBs WLAN Station Information WLAN Station Information ruckusWLANStaTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANStaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WLAN station table." ::= { ruckusWLANStaInfo 2 } ruckusWLANStaEntry OBJECT-TYPE SYNTAX RuckusWLANStaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each station entry." INDEX { ifIndex, ruckusWLANStaAddr }...
Page 98
Access Point WLAN MIBs WLAN Station Information ruckusWLANStaIpaddr OCTET STRING, ruckusWLANStaAuthMode OCTET STRING } ruckusWLANStaAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An index into the table. Specifies each station address." ::= { ruckusWLANStaEntry 1 } ruckusWLANStaRssi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION...
Page 99
Access Point WLAN MIBs WLAN Station Information DESCRIPTION "Specifies station state." ::= { ruckusWLANStaEntry 4 } ruckusWLANStaCapInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies station capability information." ::= { ruckusWLANStaEntry 5 } ruckusWLANStaAssocid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the station association id."...
Page 100
Access Point WLAN MIBs WLAN Station Information STATUS current DESCRIPTION "Specifies station idle time." ::= { ruckusWLANStaEntry 8 } ruckusWLANStaRates OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies station rates." ::= { ruckusWLANStaEntry 9 } ruckusWLANStaIpaddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-only STATUS current...
Access Point WLAN MIBs WLAN Station MQ Statistics WLAN Station MQ Statistics ruckusWLANStaMQTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANStaMQEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifes ruckusWLANMQStatTable." ::= { ruckusWLANStaInfo 3 } ruckusWLANStaMQEntry OBJECT-TYPE SYNTAX RuckusWLANStaMQEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each ruckusWLANMQStatEntry." INDEX { ifIndex, ruckusWLANStaMQAddr,...
Page 102
Access Point WLAN MIBs WLAN Station MQ Statistics ruckusWLANStaMQAveIpg Unsigned32, ruckusWLANStaMQMinIpg Unsigned32, ruckusWLANStaMQMaxIpg Unsigned32, ruckusWLANStaMQAveTxLatency Unsigned32, ruckusWLANStaMQMinTxLatency Unsigned32, ruckusWLANStaMQMaxTxLatency Unsigned32 } ruckusWLANStaMQAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station address." ::= { ruckusWLANStaMQEntry 1 } ruckusWLANStaMQQIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION...
Page 103
Access Point WLAN MIBs WLAN Station MQ Statistics ruckusWLANStaMQNumEnqueued OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of frames queued." ::= { ruckusWLANStaMQEntry 4 } ruckusWLANStaMQNumDequeued OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of dequeued frames." ::= { ruckusWLANStaMQEntry 5 } ruckusWLANStaMQNumRequeued OBJECT-TYPE SYNTAX Unsigned32...
Page 104
Access Point WLAN MIBs WLAN Station MQ Statistics ruckusWLANStaMQNumDeactivateQueue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of times queue deactivated." ::= { { ruckusWLANStaMQEntry 8 } ruckusWLANStaMQAveIpg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average inter packet arrival time." ::= { ruckusWLANStaMQEntry 9 } ruckusWLANStaMQMinIpg OBJECT-TYPE SYNTAX Unsigned32...
Page 105
Access Point WLAN MIBs WLAN Station MQ Statistics ::= { ruckusWLANStaMQEntry 11 } ruckusWLANStaMQAveTxLatency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time to transmit frames from queue." ::= { ruckusWLANStaMQEntry 12 } ruckusWLANStaMQMinTxLatency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum time to transmit frames from queue."...
Access Point WLAN MIBs WLAN Station Statistics-Ruckus WLAN Station Statistics-Ruckus ruckusWLANStaRksTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANStaRksEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies ruckusWLANStaRksTable." ::= { ruckusWLANStaInfo 4 } ruckusWLANStaRksEntry OBJECT-TYPE SYNTAX RuckusWLANStaRksEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each ruckusWLANStaRksEntry." INDEX { ifIndex, ruckusWLANStaRksAddr }...
Page 107
Access Point WLAN MIBs WLAN Station Statistics-Ruckus ruckusWLANStaRksTxRssi RuckusdB } ruckusWLANStaRksAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { ruckusWLANStaRksEntry } ruckusWLANStaRksRxGoodFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of rx frames without errors." ::= { ruckusWLANStaRksEntry 2 } ruckusWLANStaRksRxCrcErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only...
Page 108
Access Point WLAN MIBs WLAN Station Statistics-Ruckus ::= { ruckusWLANStaRksEntry 4 } ruckusWLANStaRksTxRetries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of retried frames." ::= { ruckusWLANStaRksEntry 5 } ruckusWLANStaRksTxDiscardExRetries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of discarded frames due to excessive retries." ::= { ruckusWLANStaRksEntry 6 } ruckusWLANStaRksTxRate OBJECT-TYPE SYNTAX Unsigned32...
Page 109
Access Point WLAN MIBs WLAN Station Statistics-Ruckus "Current transmit throughput." ::= { ruckusWLANStaRksEntry 8 } ruckusWLANStaRksTxPer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Packet error rate." ::= { ruckusWLANStaRksEntry 9 } ruckusWLANStaRksTxRssi OBJECT-TYPE SYNTAX RuckusdB MAX-ACCESS read-only STATUS current DESCRIPTION "Rssi for ack'ed packets."...
Access Point WLAN MIBs WLAN Rogue Info Group WLAN Rogue Info Group --******************************************************************************** --* ruckusWLANRogueInfo --******************************************************************************** ruckusWLANRogueTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANRogueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WLAN rogue device table." ::= { ruckusWLANStaInfo 5 } ruckusWLANRogueEntry OBJECT-TYPE SYNTAX RuckusWLANRogueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION...
Page 111
Access Point WLAN MIBs WLAN Rogue Info Group ruckusWLANRogueSSID OBJECT-TYPE SYNTAX RuckusSSID MAX-ACCESS read-only STATUS current DESCRIPTION "SSID." ::= { ruckusWLANRogueEntry 1 } ruckusWLANRogueMacAddr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Rogue device's MAC Address." ::= { ruckusWLANRogueEntry 2 } ruckusWLANRogueRadioType OBJECT-TYPE SYNTAX INTEGER { radio11bg (0), radio11a (1), radio11ng(2), radio11na(3) } MAX-ACCESS read-only...
Page 112
Access Point WLAN MIBs WLAN Rogue Info Group "Radio channel." ::= { ruckusWLANRogueEntry 4 } ruckusWLANRogueRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RSSI." ::= { ruckusWLANRogueEntry 5 } ruckusWLANRogueType OBJECT-TYPE SYNTAX INTEGER { ap (0), ad-hoc (1) } MAX-ACCESS read-only STATUS current DESCRIPTION...
Page 113
Access Point WLAN MIBs WLAN Rogue Info Group DESCRIPTION "Signal to Noise Ratio" ::= { ruckusWLANRogueEntry 8 } ruckusWLANRogueSignalStrength OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal strength" ::= { ruckusWLANRogueEntry 9 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point WLAN MIBs WLAN Security Information Group WLAN Security Information Group The WLAN Security Information Group contains WLAN security settings which are dependent on the ruckusWLANSecurityTable expansion relationship table. ruckusWLANSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies WLAN security settings."...
Page 115
Access Point WLAN MIBs WLAN Security Information Group wpa(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the security mode. if wep, table ruckusWLANWEPTable should be configured firstly; if wpa + 'psk' auth,table ruckusWLANWPATable should be configured firstly; if wpa + 'eap-802-1x' or 'auto' auth,firstly configure ruckusWLANAAAServerTable,then configure ruckusWLANWPATable."...
Page 116
Access Point WLAN MIBs WLAN Security Information Group auto(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the security mode. if none, for wep/none; if tkip, for wpa ver1; if aes, for wpa ver2; if auto, for wpa(ver2);" DEFVAL { none } ::= { ruckusWLANSecurityEntry 10 } ruckusWLANWEPTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANWEPEntry...
Page 117
Access Point WLAN MIBs WLAN Security Information Group ruckusWLANWEPEncryLenType INTEGER, ruckusWLANWEPKeyIndex INTEGER, ruckusWLANWEPKey DisplayString ruckusWLANWEPEncryLenType OBJECT-TYPE SYNTAX INTEGER { bit-64(1), bit-128(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the WEP encryption len type." DEFVAL { bit-128 } ::= { ruckusWLANWEPEntry 6 } ruckusWLANWEPKeyIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-write...
Page 118
Access Point WLAN MIBs WLAN Security Information Group DESCRIPTION "Specifies the WEP key. if ascII text,the length is 5 or 13, if Hexadecimal,the length is 10 or 26" ::= { ruckusWLANWEPEntry 9 } ruckusWLANWPATable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANWPAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies WLAN WPA settings."...
Page 119
Access Point WLAN MIBs WLAN Security Information Group ruckusWLANWPAVersion OBJECT-TYPE SYNTAX INTEGER { wpa(1), wpa2(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the WPA version." DEFVAL { wpa } ::= { ruckusWLANWPAEntry 5 } ruckusWLANWPAKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8..63)) MAX-ACCESS read-write STATUS current DESCRIPTION...
Page 120
Access Point WLAN MIBs WLAN Security Information Group MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the WPA radius reauthenticate period ,unit: second (only for auth type is EAP_802.1x)." DEFVAL { 600 } ::= { ruckusWLANWPAEntry 20 } ruckusWLANAAAServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANAAAServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION...
Page 121
Access Point WLAN MIBs WLAN Security Information Group ruckusWLANServerSecret OCTET STRING ruckusWLANSeverMode OBJECT-TYPE SYNTAX INTEGER { auth(1), account(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the AAA server mode:1,authenticate server;2,account server." ::= { ruckusWLANAAAServerEntry } ruckusWLANServerIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-write STATUS current DESCRIPTION...
Page 122
Access Point WLAN MIBs WLAN Security Information Group ruckusWLANServerSecret OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the AAA server access secret." ::= { ruckusWLANAAAServerEntry 15 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Page 126
Access Point WLAN MIBs WLAN Stats Table MAX-ACCESS read-only STATUS current DESCRIPTION "Number of associated stations." ::= { ruckusWLANStatsEntry 3 } ruckusWLANStatsNumAuthSta OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of authenticated stations." ::= { ruckusWLANStatsEntry 4 } ruckusWLANStatsNumAuthReq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current...
Page 127
Access Point WLAN MIBs WLAN Stats Table SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful authentications." ::= { ruckusWLANStatsEntry 7 } ruckusWLANStatsNumAuthFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of authentication failures." ::= { ruckusWLANStatsEntry 8 } ruckusWLANStatsNumAssocReq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only...
Page 128
Access Point WLAN MIBs WLAN Stats Table ruckusWLANStatsNumReAssocReq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of reassociation requests." ::= { ruckusWLANStatsEntry 11 } ruckusWLANStatsNumReAssocResp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of reassociation responses." ::= { ruckusWLANStatsEntry 12 } ruckusWLANStatsNumAssocSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only...
Page 129
Access Point WLAN MIBs WLAN Stats Table ruckusWLANStatsAssocFailRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "percentage" MAX-ACCESS read-only STATUS current DESCRIPTION "Station association fail rate. ruckusWLANStatsNumAssocFail/ruckusWLAN- StatsNumAssocReq" ::= { ruckusWLANStatsEntry 15 } ruckusWLANStatsAuthFailRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "percentage" MAX-ACCESS read-only STATUS current DESCRIPTION "Station authentication fail rate.
Page 130
Access Point WLAN MIBs WLAN Stats Table ::= { ruckusWLANStatsEntry 17 } ruckusWLANStatsRxDataFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received data frames." ::= { ruckusWLANStatsEntry 18 } ruckusWLANStatsRxMgmtFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received management frames."...
Page 131
Access Point WLAN MIBs WLAN Stats Table DESCRIPTION "Count of received unicast frames." ::= { ruckusWLANStatsEntry 21 } ruckusWLANStatsRxMulticastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received multicast frames." ::= { ruckusWLANStatsEntry 22 } ruckusWLANStatsRxBroadcastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION...
Page 132
Access Point WLAN MIBs WLAN Stats Table STATUS current DESCRIPTION "Count of received duplicated frames." ::= { ruckusWLANStatsEntry 2 } ruckusWLANStatsRxNoPrivacy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received frames without privacy bit enabled." ::= { ruckusWLANStatsEntry 26 } ruckusWLANStatsRxWEPFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only...
Page 133
Access Point WLAN MIBs WLAN Stats Table MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received frames with MIC error." ::= { ruckusWLANStatsEntry 29 } ruckusWLANStatsRxDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received frame drops." ::= { ruckusWLANStatsEntry 30 } ruckusWLANStatsRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only...
Page 134
Access Point WLAN MIBs WLAN Stats Table SYNTAX Unsigned32 UNITS "percentage" MAX-ACCESS read-only STATUS current DESCRIPTION "Received frame drop rate. ruckusWLANStatsRxDrops/ruckusWLANStatsRx- Frames" ::= { ruckusWLANStatsEntry 33 } ruckusWLANStatsTxDataFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of transmitted data frames." ::= { ruckusWLANStatsEntry 34 } ruckusWLANStatsTxMgmtFrames OBJECT-TYPE SYNTAX Counter32...
Page 135
Access Point WLAN MIBs WLAN Stats Table ::= { ruckusWLANStatsEntry 36 } ruckusWLANStatsTxMulticastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of transmitted multicast frames." ::= { ruckusWLANStatsEntry 37 } ruckusWLANStatsTxBroadcastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of transmitted broadcast frames."...
Page 136
Access Point WLAN MIBs WLAN Stats Table "Count of transmitted frame drops." ::= { ruckusWLANStatsEntry 40 } ruckusWLANStatsTxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of transmitted error frames." ::= { ruckusWLANStatsEntry 41 } ruckusWLANStatsTxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION...
Page 137
Access Point WLAN MIBs WLAN Stats Table ruckusWLANStatsPeriodTxErrorRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "percentage" MAX-ACCESS read-only STATUS current DESCRIPTION "TX packet error rate. ruckusWLANStatsTxErrors/ruckusWLANStatsTxFrames of last 5 min period" ::= { ruckusWLANStatsEntry 44 } ruckusWLANStatsPeriodAssocReq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of association requests of last 5 min period."...
Page 138
Access Point WLAN MIBs WLAN Stats Table DESCRIPTION "Number of successful associations of last 5 min period." ::= { ruckusWLANStatsEntry 47 } ruckusWLANStatsTotalAssocTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "WLAN Stats client total association time" ::= { ruckusWLANStatsEntry 49 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Radio Configuration MIBs In this chapter: • Imports • Groups • Radio Table • Radio Stats Table The objects contained in the RUCKUS-RADIO-MIB.txt file provide Access Point radio configuration options including transmit power, channel settings, transmission statistics, etc. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Radio Configuration MIBs Radio Table Radio Table ruckusRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio table." ::= { ruckusRadioInfo 2 } ruckusRadioEntry OBJECT-TYPE SYNTAX RuckusRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each Radio entry." INDEX { ifIndex } ::= { ruckusRadioTable 1 }...
Page 142
Access Point Radio Configuration MIBs Radio Table ruckusRadioMode OBJECT-TYPE SYNTAX INTEGER { auto(0), ieee802dot11g-only(1), ieee802dot11b-only(2), ieee802dot11ng(3), ieee802dot11na(4), ieee802dot11a-only(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the radio mode." ::= { ruckusRadioEntry 1 } ruckusRadioCountry OBJECT-TYPE SYNTAX RuckusCountryCode MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the country code."...
Page 143
Access Point Radio Configuration MIBs Radio Table ::= { ruckusRadioEntry 3 } ruckusRadioChannel OBJECT-TYPE SYNTAX INTEGER (0..14) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the current operating channel. When 0, it indicates the system selects the best channel automatically." ::= { ruckusRadioEntry 4 } ruckusRadioDataRate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only...
Page 144
Access Point Radio Configuration MIBs Radio Table half(1), quarter(2), eighth(3), minimum(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the transmit power of radio" ::= { ruckusRadioEntry 6 } ruckusRadioProtectionMode OBJECT-TYPE SYNTAX INTEGER { none(0), ctsOnly(1), ctsRts(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enabled when 11g and 11b clients exist on the same network.
Page 145
Access Point Radio Configuration MIBs Radio Table ruckusRadioNoiseFloor OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the noise floor of radio" ::= { ruckusRadioEntry 8 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Radio Configuration MIBs Radio Stats Table Radio Stats Table ruckusRadioStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusRadioStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radios statistics table" ::= { ruckusRadioInfo 3 } ruckusRadioStatsEntry OBJECT-TYPE SYNTAX RuckusRadioStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies radio statistics entry." INDEX { ifIndex } ::= { ruckusRadioStatsTable 1 }...
Page 148
Access Point Radio Configuration MIBs Radio Stats Table ::= { ruckusRadioStatsEntry 2 } ruckusRadioStatsNumAuthSta OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Num of authenticated stations." ::= { ruckusRadioStatsEntry 3 } ruckusRadioStatsNumAuthReq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of authentication requests."...
Page 149
Access Point Radio Configuration MIBs Radio Stats Table "Number of successful authentications." ::= { ruckusRadioStatsEntry 6 } ruckusRadioStatsNumAuthFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of authentication failures." ::= { ruckusRadioStatsEntry 7 } ruckusRadioStatsNumAssocReq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of association requests."...
Page 150
Access Point Radio Configuration MIBs Radio Stats Table DESCRIPTION "Number of successful associations." ::= { ruckusRadioStatsEntry 10 } ruckusRadioStatsNumAssocFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of association failures." ::= { ruckusRadioStatsEntry 11 } ruckusRadioStatsAssocFailRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION...
Page 151
Access Point Radio Configuration MIBs Radio Stats Table MAX-ACCESS read-only STATUS current DESCRIPTION "Station association success rate. ruckusRadioStatsNumAssocSuccess/ ruckusRadioStatsNumAssocReq" ::= { ruckusRadioStatsEntry 14 } ruckusRadioStatsResourceUtil OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Wireless resource utilization rate. ruckusRadioStatsNumSta/ruckusRadio- StatsMaxSta" ::= { ruckusRadioStatsEntry 15 } ruckusRadioStatsRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only...
Page 152
Access Point Radio Configuration MIBs Radio Stats Table ruckusRadioStatsRxWEPFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received failured WEP frames." ::= { ruckusRadioStatsEntry 18 } ruckusRadioStatsRxDecryptCRCError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of received frames with decrypted CRC error." ::= { ruckusRadioStatsEntry 19 } ruckusRadioStatsRxMICError OBJECT-TYPE SYNTAX Counter32...
Page 153
Access Point Radio Configuration MIBs Radio Stats Table ruckusRadioStatsTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of transmitted bytes." ::= { ruckusRadioStatsEntry 22 } ruckusRadioStatsTxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of transmitted frames." ::= { ruckusRadioStatsEntry 23 } ruckusRadioStatsTotalAssocTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only...
Page 154
Access Point Radio Configuration MIBs Radio Stats Table ::= { ruckusRadioStatsEntry 50 } ruckusRadioStatsBusyAirtime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "busy airtime." ::= { ruckusRadioStatsEntry 51 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Ruckus Adapter MIBs Ruckus Adapter Table Ruckus Adapter Table ruckusAdapterTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusAdapterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies adapter table." ::= { ruckusAdapterInfo 1 } ruckusAdapterEntry OBJECT-TYPE SYNTAX RuckusAdapterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each adapter entry." INDEX { ifIndex, ruckusAdapterMacAddress }...
Page 158
Ruckus Adapter MIBs Ruckus Adapter Table An index into the table." ::= { ruckusAdapterEntry 1 } ruckusAdapterReboot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting to true(1) would cause to reboot the adapter. Always returns false(2)" DEFVAL { false } ::= { ruckusAdapterEntry 2 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Ruckus Adapter MIBs Ruckus Adapter Information Ruckus Adapter Information ruckusAdapterInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusAdapterInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each adapter table." ::= { ruckusAdapterInfo 2 } ruckusAdapterInfoEntry OBJECT-TYPE SYNTAX RuckusAdapterInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each adapter entry." INDEX { ifIndex, ruckusAdapterInfoMacAddr }...
Page 160
Ruckus Adapter MIBs Ruckus Adapter Information DESCRIPTION "Adapter mac address, an index into the table." ::= { ruckusAdapterInfoEntry 1 } ruckusAdapterInfoSSID OBJECT-TYPE SYNTAX RuckusSSID MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the SSID." ::= { ruckusAdapterInfoEntry 2 } ruckusAdapterInfoBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION...
Access Point Device MIBs In this chapter: • Imports • Groups • Device Generals • SNMP Trap Receiver • Device Misc IP Configuration • Device WAN Configuration The objects contained in the RUCKUS-DEVICE-MIB.txt file provide device config- uration options including WAN interface settings, IP address, DNS address, IP addressing mode (IPv4/IPv6), and so on.
Access Point Device MIBs Device Generals Device Generals ruckusDeviceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies name of the device. Show the same value as model name." ::= { { ruckusDeviceInfo 1 } ruckusDeviceReboot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION...
Page 174
Access Point Device MIBs Device Generals MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the country code. Example ISO country codes: CA,US,HK,IL,CN,JP,TW." ::= { ruckusDeviceInfo 4 } ruckusDeviceGPS OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies GPS coordinates of the device. (e.g.
Page 175
Access Point Device MIBs Device Generals ruckusDeviceMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address" ::= { ruckusDeviceInfo 11 } ruckusDeviceIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address" ::= { ruckusDeviceInfo 12 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Device MIBs Device Misc IP Configuration Device Misc IP Configuration ruckusDevicePrimaryDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies primary DNS IP address." ::= { ruckusDeviceIPInfo 1 } ruckusDeviceSecondaryDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies secondary DNS IP address."...
Page 180
Access Point Device MIBs Device Misc IP Configuration "Specifies secondary DNS IPV6 address." ::= { ruckusDeviceIPInfo 4 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Device MIBs Device WAN Configuration Device WAN Configuration ruckusDeviceWanTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusDeviceWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each wan table." ::= { ruckusDeviceWanInfo 1 } ruckusDeviceWanEntry OBJECT-TYPE SYNTAX RuckusDeviceWanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each wan entry." INDEX { ifIndex } ::= { ruckusDeviceWanTable 1 }...
Page 182
Access Point Device MIBs Device WAN Configuration ruckusDeviceWanIPV6Gateway OCTET STRING } ruckusDeviceWanIPAddrMode OBJECT-TYPE SYNTAX INTEGER { none(1), static(2), dhcp(3), pppoe(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how the wan gets its IP address. none - bridging static - Statically assigned IP address dhcp - Using DHCP protocol pppoe - Using PPPoE protocol when ipaddr mode from dhcp to static,the relative nodes should be set...
Page 183
Access Point Device MIBs Device WAN Configuration ::= { ruckusDeviceWanEntry 2 } ruckusDeviceWanName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the name of the wan interface." ::= { ruckusDeviceWanEntry 3 } ruckusDeviceWanNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the ip address mask if the ruckusDeviceWanIPAddrMode is set to static(2)."...
Page 184
Access Point Device MIBs Device WAN Configuration STATUS current DESCRIPTION "Specifies the system ip version,ipv4 or ipv6 or dualstack. ipv4 - only support IPV4 ipv6 - only support IPV6 dualstack - support IPV4 and IPV6" DEFVAL {ipv6} ::= { ruckusDeviceWanEntry 8 } ruckusDeviceWanIPV6AddrMode OBJECT-TYPE SYNTAX INTEGER { static(2)}...
Page 185
Access Point Device MIBs Device WAN Configuration SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is writable only if the ruckusDeviceWanIPAddrMode is set to static(2)." ::= { ruckusDeviceWanEntry 11 } ruckusDeviceWanIPV6PrefixLen OBJECT-TYPE SYNTAX INTEGER (3..128) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the ip v6 address prefix length if the ruckusDeviceWanIPV6Ad-...
Access Point DHCP MIBs In this chapter: • Imports • Groups • DHCP Client Table The objects contained in the RUCKUS-DHCP-MIB.txt file provide Access Point DHCP configuration options including DHCP IP addresses, subnet mask, client IP lease time, etc. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point DHCP MIBs DHCP Client Table DHCP Client Table ruckusDHCPClientTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusDHCPClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies dhcp client table." ::= { ruckusDHCPClientInfo 1 } ruckusDHCPClientEntry OBJECT-TYPE SYNTAX RuckusDHCPClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each dhcp client entry." INDEX { ruckusDHCPClientHWAddress } ::= { ruckusDHCPClientTable 1 }...
Page 189
Access Point DHCP MIBs DHCP Client Table "Macaddress of the client, an index into the table." ::= { ruckusDHCPClientEntry 1 } ruckusDHCPClientIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the IP address of the client." ::= { ruckusDHCPClientEntry 2 } ruckusDHCPClientSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only...
Page 190
Access Point DHCP MIBs DHCP Client Table MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if the IP address needs to be renewed or not from the service provider." DEFVAL { true } ::= { ruckusDHCPClientExternal 1 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Ethernet MIBs In this chapter: • Imports • Groups • Ethernet Statistics The objects contained in the RUCKUS-ETH-MIB.txt file provide Ethernet port information objects including interface name, transmission statistics, etc. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Ethernet MIBs Ethernet Statistics Ethernet Statistics ruckusEthStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth statistics table" ::= { ruckusEthInfo 1 } ruckusEthStatsEntry OBJECT-TYPE SYNTAX RuckusEthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each Eth statictics entry." INDEX { ifIndex } ::= { ruckusEthStatsTable 1 }...
Page 194
Access Point Ethernet MIBs Ethernet Statistics DESCRIPTION "Specifies the name of the eth interface." ::= { ruckusEthStatsEntry 1 } ruckusEthStatsRxRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receipt throughput." ::= { ruckusEthStatsEntry 2 } ruckusEthStatsRxErrorRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Receipt packet error rate."...
Page 195
Access Point Ethernet MIBs Ethernet Statistics STATUS current DESCRIPTION "Transmit packet error rate." ::= { ruckusEthStatsEntry 5 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Hardware Info MIBs In this chapter: • Imports • Groups • Hardware Information The objects contained in the RUCKUS-HWINIFO-MIB.txt file provide hardware information such as serial number, model number, etc. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Hardware Info MIBs Hardware Information Hardware Information ruckusHwInfoModelNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the model number of the device." ::= { ruckusHwInfo 1 } ruckusHwInfoSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the serial number of the device."...
Page 199
Access Point Hardware Info MIBs Hardware Information ::= { ruckusHwInfo 4 } ruckusHwInfoHWMinorRevision OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies minor hardware revision." ::= { ruckusHwInfo 5 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point L2TP MIBs In this chapter: • Imports • Groups • L2TP Information The objects contained in the RUCKUS-L2TP-MIB.txt file provide Layer 2 Tunneling Protocol information including L2TP connection status, L2TP server IP address, shared secret, etc. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point L2TP MIBs L2TP Information L2TP Information ruckusL2TPServiceStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable L2TP service." DEFVAL { true } ::= { ruckusL2TPInfo 1 } ruckusL2TPConnectionStatus OBJECT-TYPE SYNTAX INTEGER { connected(1), disconnected(2), disabled(3) } MAX-ACCESS read-only STATUS current...
Page 203
Access Point L2TP MIBs L2TP Information ruckusL2TPSharedSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies L2TP Server Shared Secert." ::= { ruckusL2TPInfo 4 } ruckusL2TPUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies L2TP user name. NOSUCHNAME error returned if L2TP is diabled"...
Page 204
Access Point L2TP MIBs L2TP Information "IP of L2TP management interface." ::= { ruckusL2TPInfo 7 } ruckusL2TPIfNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Netmask of L2TP management interface." ::= { ruckusL2TPInfo 8 } ruckusL2TPIfGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Default route of L2TP management interface."...
Access Point PPPoE MIBs In this chapter: • Imports • Groups • PPPoE Information The objects contained in the RUCKUS-PPPOE-MIB.txt file provide Access Point PPPoE configuration options including PPPoE user name, password, connection status, etc. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point PPPoE MIBs PPPoE Information PPPoE Information ruckusPPPOEUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies PPPoE user name. But it will not be effective unless you set apply(1) to ruckusPPPOEApply." ::= { ruckusPPPOEInfo 1 } ruckusPPPOEPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write...
Page 208
Access Point PPPoE MIBs PPPoE Information SYNTAX INTEGER { connect(1), disConnect(2), ok(3) , disabled(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set connect(1) to connect or re-connect and disConnect(2) to PPPoE server. On read, return enabled(3) if PPPoE is enabled, or disabled(4) if PPPoE is disabled." ::= { ruckusPPPOEInfo 4 } ruckusPPPOEIfindex OBJECT-TYPE SYNTAX InterfaceIndex...
Access Point Software Info MIBs In this chapter: • Imports • Groups • Software Revision Information The objects contained in the RUCKUS-SWINFO-MIB.txt file provide Access Point software information including software revision, file size, etc. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Software Info MIBs Software Revision Information Software Revision Information ruckusSwRevTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusSwRevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains all the software revision information. This table is used to activate the inactive software." ::= { ruckusSwInfo 1 } ruckusSwRevEntry OBJECT-TYPE SYNTAX RuckusSwRevEntry MAX-ACCESS not-accessible...
Page 212
Access Point Software Info MIBs Software Revision Information STATUS current DESCRIPTION "This is an index into the SoftwareRev Table. This table contains two entries for active and inactive respectively." ::= { ruckusSwRevEntry 1 } ruckusSwRevName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION...
Page 213
Access Point Software Info MIBs Software Revision Information SYNTAX INTEGER { inactive(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current state of the software. This may either be active (currently running), or inactive." ::= { ruckusSwRevEntry 5 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Upgrade MIBs In this chapter: • Imports • Groups • Server and File Settings for Software Upgrade • Auto Upgrade Group The objects contained in the RUCKUS-UPGRADE-MIB.txt file provide Access Point upgrade firmware upgrade information such as transfer method, transfer control file name, FTP password, auto update settings, etc.
Access Point Upgrade MIBs Server and File Settings for Software Upgrade Server and File Settings for Software Upgrade ruckusFileTransferMethod OBJECT-TYPE SYNTAX INTEGER { tftp(1), ftp(2), web(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the file tranfer method. ruckusFileTransferFTPUsername and ruckusFileTransferFTPPassword must be specified if FTP(2) is elected"...
Page 217
Access Point Upgrade MIBs Server and File Settings for Software Upgrade be used when DNS resolution fails with ruckusFileTransferHostName. This node is the same as the node 'ruckusFileTransferHostName' when it is a ipv4/ipv6 address,otherwise it return NULL. The value is ipv4 address pr ipv6 address." ::= { ruckusFileTransfer 3 } ruckusFileTransferControlFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..63))
Page 218
Access Point Upgrade MIBs Server and File Settings for Software Upgrade SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to true(1) would cause upgrade to take place immediately. Always returns false(2) on read." ::= { ruckusFileTransfer 7 } ruckusFileTransferTakeEffectImmediately OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write...
Access Point Upgrade MIBs Auto Upgrade Group Auto Upgrade Group ruckusAutoUpgradeInitialCheckInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies initial check interval." DEFVAL { 5 } ::= { ruckusAutoUpgrade 1 } ruckusAutoUpgradeCheckInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION...
Page 220
Access Point Upgrade MIBs Auto Upgrade Group DESCRIPTION "To enable/disable automatic upgrade capability." ::= { ruckusAutoUpgrade 3 } ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
MediaFlex 2825 MIBs In this chapter: • Imports • Scalars and Tables • Notification Types • Groups The objects contained in the RUCKUS-2825-MIB.txt file provide SNMP MIBs for the MediaFlex 2825 AP. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Wireless Link MIBs In this chapter: • Imports • Groups • Wireless Link Table The objects contained in the RUCKUS-WLINK-MIB.txt file provide wireless link information including link uptime, transmission statistics, etc. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Access Point Wireless Link MIBs Wireless Link Table Wireless Link Table ruckusWLINKTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLINKEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WLINK table." ::= { ruckusWLINKInfo 1 } ruckusWLINKEntry OBJECT-TYPE SYNTAX RuckusWLINKEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies each WLINK entry." INDEX { ifIndex } ::= { ruckusWLINKTable 1 }...
Page 228
Access Point Wireless Link MIBs Wireless Link Table ruckusWLINKRssi Integer32, ruckusWLINKUpCount Integer32, ruckusWLINKDownCount Integer32 } ruckusWLINKSSID OBJECT-TYPE SYNTAX RuckusSSID MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the name of the SSID." ::= { ruckusWLINKEntry 1 } ruckusWLINKRole OBJECT-TYPE SYNTAX INTEGER { rootBridge(1), nonRootBridge(2), notDecided(3),...
Page 229
Access Point Wireless Link MIBs Wireless Link Table ruckusWLINKRemoteMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "It is the 48-bit MAC address of the wireless interface of remote side." ::= { ruckusWLINKEntry 4 } ruckusWLINKTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of tx packets."...
Page 230
Access Point Wireless Link MIBs Wireless Link Table ::= { ruckusWLINKEntry 7 } ruckusWLINKRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rx bytes." ::= { ruckusWLINKEntry 8 } ruckusWLINKEstablishTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The establish time of the link (UTC)."...
Page 231
Access Point Wireless Link MIBs Wireless Link Table "Link RSSI." ::= { ruckusWLINKEntry 11 } ruckusWLINKUpCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The link up count during its uptime." ::= { ruckusWLINKEntry 12 } ruckusWLINKDownCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION...
Access Point Root MIBs In this chapter: • Imports • Groups The RUCKUS-ROOT-MIB.txt file is the top-level MIB file which defines groups for each of the other modules of the Ruckus AP MIB files. ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Index Numerics 2825 L2TP groups groups imports imports notification types information access point event PPPoE MIB group groups objects imports adapter information groups product imports imports information scalars and tables ruckus adapter statistics wireless adapter products ruckus adapter table wireless controller products wireless hotzone products wireless metro products wireless router products...
Page 237
groups imports server and file settings for software up- grade wireless link 226, 233 groups 226, 233 imports wireless link table WLAN groups imports security information group station information station MQ statistics station statistics-hardware station statistics-ruckus stats table supported receive rates supported transmit rates table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A...
Need help?
Do you have a question about the zoneflex r300 and is the answer not in the manual?
Questions and answers