Table of Contents
Advertisement
STAIRLIFT OPERATION
HOW TO CHANGE THE REMOTE BATTERY
9v PP3
BATTERY
Slide the battery cover
Remove the battery.
Insert the new battery
off the reverse of the
Please take old batteries to a
base fi rst and
remote control.
recycling centre or a collection
push down fi rmly.
point at your local electrical store
Slide the cover on.
or supermarket.
Please ensure that the battery is connected correctly. If the battery is
connected wrong it could damage the remote and may require replacing.
The unit will operate with the seat pad or footrest in the folded
position. However, it will not work if the seat has been turned to
the 45º and 90º position, or the safety arm has been left up*.
This will be indicated by 'E6' on the display panel.
The downside arm of the seat must be completely down for the
stairlift to operate.
*Perch/Sit-Stand Models
MANUAL SWIVEL SEAT
When the unit reaches the upper end
of the track, it will stop automatically.
The seat must now be turned to make
getting on and off the stairlift safe.
Acorn Stairlifts User Manual
13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Superglide 130 and is the answer not in the manual?
Questions and answers
Just bought an acorn **** stairlift and I **** trying to troubleshoot the electrical system. I **** getting a motor fault code. I changed from F1 to F3. any suggestions?
For an Acorn Superglide 130 stairlift motor fault code, follow these troubleshooting steps:
1. Reset the Stairlift: Turn off the stairlift, wait for approximately 30 seconds, and then turn it back on.
2. Contact Dealer if Unresolved: If the issue persists, contact your authorized Acorn dealer for assistance.
This answer is automatically generated
On a acorn **** which is the - charge rail and which is the + charge rail
Code a 1 what the chair showing