Sony LKRA-009 Installation Manual page 123

5. Tap the radio button of "Internal Folder".
6. Tap [Browse], then select the software license from "Ingest_USB_1".
7. Select "ATMOS License Key File" from the pull-down menu, then tap [Upload].
8. After the upload is completed, proceed to the step of the software license activation.
t
When selecting the license file stored on PC, click the radio button of "External Folder" in step 5.
License activation
To activate the license, it is required to perform the license activation after installing the license file.
Perform the procedure in Section 4-2 in the Maintenance Manual of the Digital Cinema Projector Package
SRX-R515P/R510P, and select ATMOS License Activate package when setting the Unified Update Man-
ager (UUM) package.
Check of license activation
Check if the license activation has been performed correctly.
1. Tap "Status" tab → [Status].
Status tab [Status]
Screen example
2. Check the license activation status by the color of the ATMOS lamp in the Connection pane.
. Green: License is activated. CP850 is connected.
. Amber: License is activated. CP850 is not connected.
. Gray:
License is not activated, or the license file is not installed. Perform the license activation
again.
Digital Cinema Dual System
Connection pane
5-53 (E)