Sony LKRA-009 Installation Manual page 121

Associating a GPIO channel (only input pin) with an Emergency signal (Fire Alarm)
This system can safely process a projector in the preset procedure when it receives the signal from an
external fire alarm system. (Refer to Section 5-14-1.)
To use this function, it is necessary to set the GPIO channel, connected with an external fire alarm system,
properly and then register the GPIO channel as an Emergency signal (Fire Alarm). The ini file (text file in
which initialization is described and whose file name is SMSMgrServer_Custom.ini) saved in the server
must be changed to register the GPIO channel as an Emergency signal (Fire Alarm). Refer to Section
5-13-1 for the change in an ini file.
1. Enter the "ini" file edit mode. (Refer to steps 1 to 5 in Section 5-13-1.)
2. Add the lines below.
com.sony.dcinema.automation.impl.AutomationConfig.EMERGENCYENABLED=true
com.sony.dcinema.automation.impl.AutomationConfig.EMERGENCYINPUT=0
Change the bold-faced portion as described below.
0 to 7: Channels 0 (IN1) to 7 (IN8)
3. Add the line below.
com.sony.dcinema.automation.impl.GpioMgrCommonImpl.EMERGENCY_DEVICE=GPIO
Change the bold-faced portion as described below.
. When a channel is GPIO: GPIO
. For eCNA:
4. Save the changed contents and end the registration. (Refer to steps 6 to 8 in Section 5-13-1.)
n
The GPIO channel registered as an Emergency signal (Fire Alarm) cannot be associated with
other operations. "undefined" is displayed in the Name column of other GPIO channel using
the profile being associated with the above GPIO channel.
When [undefined] is tapped, the settable profiles are displayed in pull-down list. You can
change the association by selecting the desired profile from the pull-down list.
Associating a GPIO channel (only an input pin) with the playback start trigger of sched-
ule playback
This system can start the playback of the scheduled SPL when it receives the signal from external equip-
ment.
To use this function, it is necessary to set the GPIO channel, connected with external equipment, properly
and then register the GPIO channel as the playback start trigger of schedule playback. The ini file (text
file in which initialization is described and whose file name is SMSMgrServer_Custom.ini) saved in this
server must be changed to register the GPIO channel as the playback start trigger of schedule playback.
Refer to Section 5-13-1 for the change in an ini file.
1. Enter the "ini" file edit mode. (Refer to steps 1 to 5 in Section 5-13-1.)
2. Add the lines below.
com.sony.dcinema.sms.showScheduleMgr.impl.PlayBackModeAdapterImpl.SCHEDULED_GPI_EN
ABLED=true
com.sony.dcinema.sms.showScheduleMgr.impl.PlayBackModeAdapterImpl.
SCHEDULED_PLAY_GPI_PIN=0
Change the bold-faced portion as described below.
0 to 7: Channels 0 (IN1) to 7 (IN8)
3. Save the changed contents and end the registration. (Refer to steps 6 to 8 in Section 5-13-1.)
n
The GPIO channel registered as the playback start trigger of schedule playback cannot be
associated with other operations.
Digital Cinema Dual System
eCNA
5-51 (E)