Registration Of Adjustment Result (Function Memory Function) - Sony LKRA-009 Installation Manual

5-8-8. Registration of Adjustment Result (FUNCTION MEMORY Function)

The adjustment and setting data can be registered on this system. In general, the adjustment, setting and
registration are performed for each signal types (2D/3D, field angle (HD/scope/flat)) of contents to be
reproduced. The registered data is called when the contents are reproduced.
n
. When the projector is in standby state displaying the test pattern, the registration and calling of function
memory cannot be performed.
. Register the function in both main projector and sub-projector.
. Use the same function number and name in the main projector and sub-projector.
1. After the adjustment and setting are completed, tap the "Configuration" tab.
2. Tap [Projector|$2D%] → [Set|Function].
The Set Function screen is displayed.
[Projector|$2D%]
Screen example
3. Select the function memory that you want to register from Function List pane on the Projector (2D)
screen, then tap [Save].
4. Type the function name and tap [Apply].
The alphanumeric characters and symbols can be used as the function name (up to 32 characters).
5-36 (E)
[Save]
[Set|Function]
Digital Cinema Dual System