Advertisement
FiOS by Frontier
®
Router and
Optional MoCA
Adapter
Arris NVG468MQ
Arris MEB1100
QUICK SETUP GUIDE
STEP 1
Check your Config
Your new FiOS
by Frontier
®
MoCA from the Optical Network Terminal (ONT) to your FiOS Router. Check your
packaging contents.
If you have a MoCA Adapter, make sure you have the following:
NEXT:
Proceed to Step 2
If you don't have the MoCA adapter, check your packaging contents and make sure you
have the following:
NEXT:
Proceed to Step 2
Data service could be configured using Ethernet or
®
MoCA Adapter (1)
FiOS Router (1)
Coax Cable (3) Ethernet Cable (1) USB Cable (1)
Power Adapter (1)
FiOS Router (1)
®
Power Adapter (1)
Splitter (1)
Coax Cable (1)
Ethernet Cable (1)
Advertisement
Table of Contents
Related Manuals for Frontier FiOS Arris NVG468MQ
Summary of Contents for Frontier FiOS Arris NVG468MQ
-
Page 1: Quick Setup Guide
FiOS by Frontier ® ® Router and Optional MoCA Adapter Arris NVG468MQ Arris MEB1100 QUICK SETUP GUIDE STEP 1 Check your Config Your new FiOS by Frontier Data service could be configured using Ethernet or ® ® MoCA from the Optical Network Terminal (ONT) to your FiOS Router. Check your packaging contents. - Page 2 Enter the Wi-Fi password to securely connect your Sample image, use device to your Router. credentials on the router CONGRATULATIONS YOU HAVE SUCCESSFULLY INSTALLED AND CONFIGURED YOUR ROUTER. frontier.com/helpcenter To learn more, go to...
- Page 3 YOU HAVE SUCCESSFULLY CONGRATULATIONS INSTALLED AND CONFIGURED YOUR ROUTER. PROBLEM: I HAVE QUESTIONS NOT COVERED IN THIS GUIDE. • SOLUTION: Please call the Frontier helpdesk at 1.800.921.8101. To learn more, go to frontier.com/helpcenter SUPPORT: Videos are available at frontier.com/helpcenter. Detailed instructions on setting up a home wireless network are available at frontier.com/helpcenter.
Need help?
Do you have a question about the FiOS Arris NVG468MQ and is the answer not in the manual?
Questions and answers
How do I change the password on my router?
To change the password on your Frontier FiOS Arris NVG468MQ router:
1. Open a web browser and go to `http://192.168.254.254`.
2. Log in using the credentials found on the router.
3. Navigate to the settings section to personalize the router.
4. Update the password as needed and save the changes.
Make sure to note any changes for future reference.
This answer is automatically generated
Enable 2.4 ghz and use both 2.4 and 5
How many WiFi connection can it handle? How many concurrent network connections can it handle?