Page 1
Controller PA RC100 Function Switch 1-4 Rotary-Switch Night light Equal charging Float charging Load disconnect LVD Boost charging Load reconnect LVR Function Switch 1-4 Charge controller standard setting Switch 1 Battery condition PRS 1515 Solsum 6.6F Liquid Switch 1 OFF...
Page 2
Connect a battery to supply the controller and carry out steps 3.2 and 3.3 within one minute. Place the LED of the Steca PA RC100 remote control in the recess for the green battery LED on the right. User's manual...
Page 3
The charge controller INFO LED flashes red = Transmission error. In this case you should separate the controller from the battery and repeat the procedure from step 3.1 or, if required, recheck the settings for the Steca PA RC100 remote control in accordance with step 2.1. Note about the night light function.
Need help?
Do you have a question about the PA RC100 and is the answer not in the manual?
Questions and answers