Setup From Control Device - Epson RC180 Manual

Setup & Operation 4. Operation Mode (TEACH/AUTO)

4.4.3 Setup from Control Device

Set the control device from EPSON RC+ 5.0.
(1) Select EPSON RC+ 5.0 menu-[Setup]-[Controller] to display the [Setup Controller]
(2) Select [Configuration].
(3) Select [Setup Controller]-[Control Device] to select the control device from the
(4) Click the <Apply> button.
(5) Click the <Close> button.
36
dialog.
(2)
following three types.
PC
Remote (I/O)
OP (Option: Operator Panel)
(5)
(4)
(3)
RC180 Rev.17