Epson RC180 Manual page 223

No. Message
3283 TextAlign was not specified.
3284 WindowState was not specified.
3285 J1FLAG was not specified.
3286 J2FLAG was not specified.
3289 areaID was not specified.
External definition
3300
included. (Not in use)
Version of linked OBJ file does not
3301
match.
Linked OBJ file does not match the
3302
compiled I/O label.
Linked OBJ file does not match the
3303
compiled user error label.
Linked OBJ file does not match the
3304
compiled compile option.
Linked OBJ file does not match the
3305
compiled link option.
Linked OBJ file does not match the
3306
compiled SPEL option.
3307 Duplicate function.
3308 Duplicate global preserve variable.
3309 Duplicate global variable.
3310 Duplicate module variable.
3311 File cannot be found.
3312 OBJ file is corrupt.
The specified file name includes
3313
character(s) that cannot be used.
3314 Cannot open the file.
RC180 Rev.17
TextAlign property setting value is not
specified in GSet statement.
This error occurs when the control is
other than a text box.
Builder 5.0 manual "TextAlign Property"
and specify a proper setting value.
WindowState property setting value is
not specified in GSet statement.
Refer to GUI Builder 5.0 manual
"WindowState Property" and specify a
proper setting value.
Specify 0 or 1, or an expression for
J1Flag value.
Specify 0 or 1, or an expression for
J2Flag value.
Area number
InsideBox and InsidePlane function.
Specify an approach check area number
which returns status by an integer from 1
to 15.
symbol was
Not all project files are complied in the
same version.
Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The same function name is used for more
than one file.
(function name).
The same global preserve variable name
is used for more than one file.
Correct the program (variable name).
The same global variable name is used
for more than one file.
Correct the program (variable name).
The same module variable name is used
for more than one file.
Correct the program (variable name).
The file is used for other application.
Quit the other application.
Maintenance 8. Trouble Shooting
Remedy
Refer to GUI
is not specified in
Perform the rebuild.
Correct the program
Note 1 Note 2
211