Dial Analysis Table For Ars/Lcr - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Program
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables for selecting
Automatic Route Selection (ARS/F-Route).
26
• Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.
• Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Input Data
Item
No.
01
02
03
04
05
06
07
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
2-294
Downloaded from www.Manualslib.com
Program 26 : ARS Service & Least Cost

26-02 : Dial Analysis Table for ARS/LCR

Dial Analysis Table Number
Item
Dial Dial Digits (maximum 16 digits)
0 ~ 9, , #, or for wild character (Press line key 1)
*
ARS Service Type 0 = No Service (None)
1 = Route to Trunk Group
2 = Select F-Route Access
Additional Data/ If Service Type 1 (in 26-02) : Select Trunk Group Num-
Service Number ber
0 ~ 25 (Trunk Group Number 0 = No Route)
If Service Type 2 (in 26-02) :
F-Route Time Schedule Not Used = 0 ~ 100
(F-Route Table Number).
Refer to Program 44-05 : ARS/F-Route Table on page
2-368.
F-Route Time Schedule Used = 0 ~ 100
(F-Route Selection Number).
Refer to Program 44-04 : ARS/F-Route Selection for
Time Schedule on page
ARS Class of Service 0 ~ 16
Dial Treatment for 0 ~ 15
ARS
LCR Carrier Table 0 ~ 25
Network Specified 0 ~ 16
Parameter Table
manuals search engine
1 ~ 400
Input Data
2-367.
Program 26 : ARS Service & Least Cost Routing
ISSUE 1.0
Routing
Related Pro-
Default
gram
No setting
0
0 44-04
44-05
0
0
0
0 26-12