Installing The Hob - Samsung NZ63K7777BK Service Manual

2-5 Installing the hob

2-5-1 Installing into the countertop
A.
Pay special attention to the minimum space and clearance requirements.
The bottom of the hob is equipped with a fan. If there is a drawer under the hob
it should not be used to store small objects or paper, since they could damage the
fan or interfere with the cooling if they are sucked into it.
No.
01
02
03
04
05
06
07
08
09
10
11
12
This document can not be used without Samsung's authorization.
A
Serial number
NOTE
NOTE
01
02
06
04
05
Explanation
Check 4 Point
Drill diameter
Right angle of cutting point
Width Size
Height Size
Curve Size
Size of table thickness
Distance between end of table and cutting point (Top-side)
Height of table
Distance between end of table and cutting point (Left-side)
Distance between end of table and cutting point (Right-side)
Distance between end of table and cutting point (Bottom-side)
NOTE
Make a note of the serial number on the
appliance rating label prior to installation.
This number will be required in the case
of requests for service and is no longer
accessible after installation, as it is on the
original rating plate on the underside of the
appliance.
No. Explanation
01 Height of
ventilation hole
02 Width of
ventilation hole
01
02
03
08
07
09
10
- 5 -
Size
Min 2 mm
560 mm
11
12
Size
Ø 6
90 °
560±1 mm
490±1 mm
R3
Max 50 mm,
Min 20 mm
Min 60 mm
Min 600 mm
Min 60 mm
Min 60 mm
Min 50 mm