NEC QX-S6648XP-6Q Installation Manual page 80

Installation Guide
QX-S6600 Series Ethernet Switches
Enter the Boot ROM password (no password is required by default) at the following prompt
to access the Boot menu:
 NOTE:
After three password attempts fail, you must reboot the switch and try again.
BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade
menu
Table 6-1 Boot menu options
Item
Download a software image file to the Flash memory.
Select the main or backup startup software image to boot.
Select the main or backup configuration file to boot.
Display all files in the Flash memory.
Delete files from the Flash memory.
Modify the Boot ROM password.
The system by default has no Boot ROM password. NEC recommends that
you set a Boot ROM password immediately after you access the Boot
menu.
Access the Boot ROM update submenu.
Description
6-14
6 Upgrading software