Table of Contents
Advertisement
Installation Guide
QX-S6600 Series Ethernet Switches
User(1.1.1.1:(none)):abc
331 Password required for abc.
Password:
230 User logged in.
6)
Enable the binary file transfer mode.
ftp> binary
200 TYPE is now 8-bit binary.
7)
Upload the file (for example, newest.ipe) to the root directory in the Flash memory of
the master switch.
ftp> put newest.ipe
200 PORT command successful
150 Connecting to port 10002
226 File successfully transferred
ftp: 32133120 bytes sent in 64.58 secs (497.60 Kbytes/sec).
IV. TFTP download from a server
To download a file from a TFTP server, for example, the server at 10.10.110.1:
1)
Run a TFTP server program on the server, specify the working directory, and copy the
file, for example, newest.ipe, to the directory.
2)
On the IRF fabric, perform the tftp command in user view to download the file to the
root directory in the Flash memory of the master switch.
<Switch> tftp 10.10.110.1 get newest.ipe
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 30.6M 0 30.6M 0 0 143k 0 --:--:-- 0:03:38 --:--:-- 142k
V. Copying files from a USB flash drive
Every QX-S6600 Series provide a USB port for you to copy files from a USB flash drive.
To copy a file from a USB flash drive to the Flash memory of the master switch:
1)
Plug the USB flash drive in the USB port of the switch.
2)
Copy the file (for example, newest.ipe) to the Flash memory of the switch.
<Switch> copy usba:/newest.ipe flash:/newest.ipe
Copy usba:/newest.ipe to flash:/newest.ipe?[Y/N]:y
6-8
6 Upgrading software
Advertisement
Chapters
Table of Contents
