Control Systems
Power distribution system
IV
IV
1. Electricity meter interface module
MIM-B16N
7) Wiring
Wiring to electricity meter
Attention must be paid to make polarized connection between an electricity meter and MIM-B16N with correct specifications
on wires.
Typical interface circuitry
+
+
Wiring to DMS2
Make sure that communication cable is wired between DMS2 and MIM-B16N with the right polarity.
Caution
MIM-B16N can be connected with outdoor units/controllers to same channel of DMS2.
Ex)
DM2, Outdoor unit or Controller should be new communication applied products.
MIM-B16N should be connected to dedicated channel of DMS2.
132
+
Cable :
Length :
A B
Cable :
Length :
MIM-B16N
+
+
+
+
VCTF or equivalent
2
MIM-B16N
A B
2
VCTF or equivalent
to another MIM-B16N