Deleting A Remote Server - Siemens RX1500 User Manual

Chapter 3
Device Management
Figure 43: Remote Server Form
1. Enabled Check Box
5. Configure the following parameter(s) as required:
Parameter
enabled
6. Configure one or more selectors for the server. For more information, refer to
Remote Server
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 3.9.4.3

Deleting a Remote Server

To delete a remote server, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » logging » server. The Remote Server table appears.
1
Figure 44: Remote Server Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen remote server.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
52
Description
Enables/disables the feed to the remote logging server.
Selector".
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Section 3.9.5.2, "Adding a
Deleting a Remote Server