3 1 Replacement of the Ceramic Glass
Ceramic Glass
3 2 Replacement of the Display board
Display board
1
C
B
2
1. Disconnect power.
2. Remove 12 screws from 4 edges (3
screws each edge) that are locking the
ceramic glass with the radiator board.
3.Use the shape "-" group to lift
the ceramic glass from the radiator
D
board at the points shown in
image 1 (A) with the height shown
in image 2 (lift until screw holes are
above the radiator board). After
taking the same operations at points
A
(B), (C) and (D) shown in image 1,
the ceramic glass will be able to be
up
removed from the radiator board.
4. After replacing the ceramic glass, lock
the ceramic glass to the radiator
board by screws.
1.Lift up the display board.(The
display board is fixed by 4
plastic buckle)
2. Disconnect all sub-wire.
3. Replace the display board.